FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
High Build Primer/Undercoat Aerosol Spray 400ml
Carbosol High Build Primer/Undercoat aerosol is a multi-purpose solvent borne air drying universal base coat aerosol.
- Suitable to be used as a primer / undercoat.
- Can be used on wood, metal, previously painted surfaces, and most other surfaces.
£6.54
Stay Social. Connect with us.
Product Description
Carbosol High Build Primer/Undercoat is now available in an aerosol format. Use on wood, metal, previously painted surfaces and most other surfaces. Suitable surfaces include wood, ferrous metal, masonry and previously painted surfaces. Not only available in white but also supplied in grey and red. This means you can select the correct shade type for your suitable top coat. This primer is touch dry in 3 hours.
Read our blog on Metal Primers
Product Documents
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “High Build Primer/Undercoat Aerosol Spray 400ml”
Reviews
There are no reviews yet.