Carbodeck Marine Anti-Slip Paint

(1 customer review)

A single pack anti-slip paint for use in marine areas such as boat decks, steps, ramps, doorways and machinery areas.

  • Suitable for both interior and exterior use
  • Can be applied to wood, metal, concrete and GRP surfaces
  • Touch dry in 3 hours




Stay Social. Connect with us. 

Product Description

Carbodeck Marine Grip Anti-Slip Paint is a single pack coating designed for use in marine areas and on boat decks. It can be applied to prepared and primed wood, metal, concrete and GRP surfaces.

The anti slip additive in the paint provides much more grip than standard coatings, making it ideal for use in areas where safety is a concern, or surfaces exposed to significant rainfall. These includes steps and stairs, access ramps for boats, doorways, disabled ramps and exterior walkways.

As a marine coating, Carbodeck Marine Grip is able to withstand long term exposure to both the weather and water, as well as resisting everyday wear such as scuffs, knocks and scratches.

As a manufacturer of paints, we are able to provide a greater level of service than most other paint suppliers. We have full technical knowledge of our paints and can provide advice on compatibility with surfaces and coatings, application and more through web chat, phone or email.

We also provide a custom colour tinting service, allowing us to produce a much wider range of colours than those shown here. If you would like more details on this service, please contact us and we will be happy to help you find the ideal colour for your requirements.

Carbodeck Marine Grip Anti-Slip Paint Application

Preparation: On previously painted surfaces, ensure any flaking material is removed and the surface is sound. Abrade the surface preferably by mechanical abrasion to provide a “key” and maximise adhesion of the subsequent coating. For surfaces contaminated with mould, mildew, algae and fungi use Barrettine Mould & Mildew Cleaner. For surfaces contaminated with oil & grease remove with a universal degreaser.

On wooden surfaces, apply Boat & Barge Marine Undercoat as a first coat. For metal surfaces, use Boat & Barge Marine Anti Corrosive Primer. For use on cured concrete, first apply Palatine Acid Etch for Floors, followed by Pliocem Concrete Sealer.

Mixing: Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application to avoid avoid settling and maintain consistency of the anti-slip additive.

Application: Apply by brush or short / medium pile roller. Avoid applying the paint to thickly to avoid delaying drying times. The second and subsequent coats can be applied as soon as the first / preceding coat is dry usually after 12-24 hours, and should be applied within 5 days.

If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid power washing the surface for 7 days.

Carbodeck Marine Anti-Slip Paint is touch dry in 3 hours and hard dry in 24 hours.

Expected Coverage: 8 to 10m² per litre

For cleaning, use white spirit. Do not thin.

For full technical, safety and application details, please refer to the data sheets available for download.

The correct solvent for thinning and cleaning for this product is Palatine White Spirit

Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.

The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.

Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.

Best results are obtained in warm (minimum 10°C), dry conditions.

Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.

Thinning and Cleaning: Use Palatine White Spirit.

If using more than one batch of the same colour, intermix before use

Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.

Subsequent Coat
A second coat is recommended for maximum protection.

1 review for Carbodeck Marine Anti-Slip Paint

  1. Hema (verified owner)

    Ordered the paint in light grey. Nice paint, lots of anti slip grit in there, just need to give it a good stir before applying.

Add a review

You may also like…

Marine Satin Paint

Carbosil Marine Paint Satin


Garden Furniture Paint

Low Odour White Spirit – Carbosolv


A tin of Carbodeck Marine Grip Anti-Slip Paint in black
Carbodeck Marine Anti-Slip Paint
£17.04£61.35 Select options
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.