Product Description
Carbosol Professional Matt Aerosol Spray Paint is custom made for a quality, quick drying matt finish in easy to apply 400ml spray. With a long term, protective finish it’s the ideal decorative top coat which looks great on both metal and wood with a drying time of 15 minutes.
- Suitable for both interior and exterior use
- Excellent for metal, wood and other substrates (please ask about specific surfaces)
- Popular for wood panelling, ornamental and structural metalwork, cupboards and garage doors
The protective matt finish spray comes in five standard colours including contemporary anthracite grey RAL 7016. Alternatively, if you need a different colour, then contact us, as we can colour match to RAL Classic, BS 4800 and BS 381c colour codes.
Professional Matt Finish Spray Paint – Application Tips
- Apply in an area that is well ventilated
- Use masking tape to prevent damage from over spray
- Light, even strokes, avoiding overlap will achieve the best results
Highlights
- Typical uses: Protective and decorative matt spray paint for metal and wood ideal for matching, touching up and smaller projects
- Finish: Smooth Matt
- Theoretical Coverage: 2m² per 400ml
- Surface Dry: 15 minutes
Also available in satin and gloss finish
Sizes: 400ml
*Please note a multi surface primer is recommended before applying on some substrates
Please note: Due to printing limitations, the colour may vary from the cap and can colour
The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Reviews
There are no reviews yet.