FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Carbosol Professional Gloss Aerosol Spray 400ml
Carbosol Professional Gloss Finish Aerosol provides a stunning, high gloss, protective finish ideal for use on wood and metal. Additionally, this spray gloss is great to use on many other surfaces. Manufactured here in the UK and delivered promptly and efficiently. We can manufacture this paint to RAL Classic and BS Colour codes.
- First class gloss finish and long term protection
- Fast Drying with good spray characteristics
- Easy to use and apply
- Also available in popular anthracite grey
See below for more information.
£11.75
Stay Social. Connect with us.
Product Description
Carbosol Professional Gloss Aerosol Spray 400ml is a fast drying, custom made, protective gloss paint in an easy to apply aerosol. Made for long term protection, our gloss topcoat spray paint is suitable for both interior and exterior wood and metal use, available in black, white and a range of colours. Use on its own or over Carbosol high build primer spray.
- Durable protection and great finish
- Ideal for restoration projects
- Suitable for use on a range of surfaces including wood, metal and other substrates
Carbosol Professional Gloss spray paint is popular for skirting boards, architraves, doors, window frames, radiators and cupboards and much more. While this gloss spray paint is available in eight standard colours including black, white and anthracite grey, we can also custom mix aerosol paint to a colour of your choice. Ideal for use on exterior wood paint or metal paint and highly popular for garage doors and front doors.
Also available: satin finish aerosol and matt finish aerosol
Can’t see the colour you are looking for? Contact us as we have the facility to colour match to: RAL Classic – BS 4800 – BS 381c colour codes. Select colour chart above, to see the RAL Classic colours.
Sizes: 400ml
Professional Gloss Spray Paint – Application Tips
- Ensure surrounding areas are well masked against overspray
- Apply in a well ventilated area and/or wear an appropriate face mask
- Use light, consistent strokes avoiding overlap to achieve even coverage
Highlights
- Typical uses: Superb quality gloss spray paint, for wood and metal ideal for smaller projects, hard to reach areas and touching up
- Finish – High Gloss
- Theoretical Coverage: 2m² per 400ml and surface dry 15 minutes
- Colour Matching Available – to RAL Classic/BS381c/BS4800 codes
*Please note a multi surface primer is recommended before applying on some substrates
Please note: Due to printing limitations, the colour may vary from the cap and can colour
The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
Product Documents
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Carbosol Professional Gloss Aerosol Spray 400ml”
You may also like…
£7.01 exc VAT | £8.41 inc VAT
£7.01 exc VAT | £8.41 inc VAT
Reviews
There are no reviews yet.