Product Description
Garden Furniture Primer Undercoat Spray is a 400ml format of our Garden Furniture Primer Undercoat. The undercoat is oil based and designed to be applied to new or previously painted furniture such as chairs, tables and benches before application of our Professional Garden Furniture Paint.
The aerosol form allows you to apply Garden Furniture Primer Undercoat to areas that are hard to reach with a brush, such as the underside of a chair or bench. Garden Furniture Primer Undercoat comes in four different colours. This means you can choose a colour that will not clash with your chosen topcoat colour.
The undercoat also allows you to change the colour of furniture without needing to remove the existing paint. You can achieve this by using an undercoat colour that bridges the difference between colours.
Surface dry: 3 hours
Estimated coverage: 2sqm per 400ml
We are proud to be a member of the British Coatings Federation.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Reviews
There are no reviews yet.