Product Description
Our Satin Garden Furniture Spray paint is a 400ml aerosol format of Palatine Professional Garden Furniture Paint, which is an oil based, satin finish topcoat designed for use on a variety of wooden and metal garden furniture, including chairs, tables and benches.
If you’re looking for metal or wooden garden furniture paint to give a new lease of life, our Professional Garden Furniture spray paint is a great choice. The aerosol format is useful for getting to hard to reach areas, such as the tops of chair legs. It provides a range of solid, vibrant colours and an eye-catching satin finish. With a range of 30 gorgeous stock colours to choose from, there are many options available to renovate and transform your garden furniture. We also offer colour matching facilities to RAL and BS colour codes.
Surface dry in 3 hours
Estimated Coverage: 2sqm per 400ml
Also available in a Matt finish.
Please note:
The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
We are a proud member of the British Coatings Federation.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Reviews
There are no reviews yet.