Product Description
Safewalls Anti Viral Smoke & Flame Retardant protects interior walls and ceilings from both fire and viruses when applied over Safewalls Insulating Basecoat.
In a fire, the basecoat expands to create an insulating barrier and the anti viral smoke and flame retardant emits a safe fire damping vapour that suppresses smoke and controls the spread of the fire. This provides fire ratings Class B s1 d0 and Class 0.
The polyurethane hardened acrylic in the coating “cross links” in the drying process, which creates a smoother and harder surface. This prevents the microscopic pockets that form in traditional paints that host bacteria and prevent effective cleaning.
For further details on how Safewalls works, please see the technical data sheet.
The Safewalls system can be applied over any type and number of existing wall paints, preventing the need to remove them before using this system.
Safewalls Anti Viral Smoke & Flame Retardant is touch dry in 1 hour and hard dry in 4 hours.
For full details, please see the datasheets.
Please leave a note at the checkout stating which colour you would like. Please see the product documents section to see the available colours.
Before purchasing any intumescent coatings or related products from Palatine Paints, it is essential to contact our technical support team to obtain a project-specific specification and expert guidance. The information provided is intended for general guidance only and should not be relied upon as a substitute for professional advice.
Palatine Paints accepts no liability for any damage to property, risk to human life, or financial loss resulting from incorrect specification, surface preparation, application, or ongoing maintenance—particularly where such issues arise due to failure to consult our technical team. This includes, but is not limited to, negligence by the purchaser or applicator, or failure to follow the recommended procedures and advice.
Please Note: Thermoguard products are exempt from Palatine Paints’ standard returns policy. Returns are only accepted if the product is faulty. Thermoguard do not accept returns for any other reason, including change of mind or incorrect ordering.
Application Conditions
Do not apply in temperatures under 8°C or above 30°C.
Maximum relative Humidity below 75%.
Surface should be at least 3°C above the dew point.
Preparation
Safewalls Insulating Basecoat must be clean and fully hard dry. Stir well before use
Application
Over Safewalls Insulating Basecoat
Apply 1 good coat of Safewalls Anti-Viral Smoke & Flame Retardant Matt or Satin
Brush or Roller
Use woven short pile roller sleeve or synthetic brush
Best wall paint method is to first lay paint across an area, then promptly roll vertically
Spray
Pressure Pot and Gun conventional with hand-portable compressor.
Thin 5% water
OR Airless Graco 1500, 3500 or equivalent. 3/8” line, 30 mesh filter on machine, no filter in gun. 521, 523, 621 or 623 tip
Ensure coverage is applied as per can i.e., 20 sqm can covers 20 sqm.
Cleaning
Return as much unused material to its original container as possible. Wash brushes, rollers and guns with clean water immediately following use.
Coverage
Follow on can guide to coverage to enable project Certification.
Drying Times
In normal conditions product will be touch dry in an hour and fully dry after 4 hours
Reviews
There are no reviews yet.