Stay Social. Connect with us.
We accept most major credit/debit cards and e-wallets
FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Barrettine Peelaway Marine
Peelaway® Marine is specially designed to effectively remove multiple layers of anti foul paints with one application, saving time by reducing the need for repeated scraping.
Suitable for the following surfaces:
- GRP – WOOD – METAL – CONCRETE
Peelaway® Marine, less time under your boat, more time enjoying it.
£95.89 – £196.91
Product Description
Barrettine Peelaway Marine Antifouling Remover is specially formulated to effectively remove multiple layers of anti foul paints with one application, saving time by reducing the need for repeated scraping.
Its patented water based poultice system means the product remains active and works without rapidly drying out. The special poultice blanket provided enables the removed anti-foul paint to be collected easily and so reduces boatyard/dockside contamination risk.
The light paste consistency and is easy to apply to vertical surfaces and difficult shapes. It can be applied with a brush or trowel and for larger areas an airless sprayer can be used. Always carry out a test patch before general application. Suitable for most hull types including GRP, wood, steel and concrete.
Pack includes Barrettine Peelaway Marine, Blanket and Spatula.
Additional blankets are also available to order.
Sample pots are available here.
Test Patch
It is essential to apply a test patch to an area typical of the surface to be stripped to ensure the results will be satisfactory. This will also indicate the dwell time required and thickness of paste to be applied.
Application
- Apply evenly with Airless spray, brush or trowel working into crevices, including on wooden hulls where planks overlap, ensuring raised edges and corners are covered well.
- Apply a second coat to the final tested thickness, finally lay on the poultice with printing facing outwards, gently rubbing to exclude trapped air bubbles.
- Work in manageable areas which can be removed within the time scale indicated by the test patch. Peelaway® Marine should not be left on longer than 48 hours when used on GRP/Gel coat substrates.
Removal
Slide scraper into paste and paint, keeping the paint, paste and cover together as much as possible.
Take care not to gouge/scratch the gel coat. Steam cleaning or pressure washing may aid removal of residues.
Once all the old anti-fouling paint has been removed, any remaining residues of Peelaway® Marine must be cleaned/washed away.
Allow the cleaned surface to dry thoroughly before re-coating.
- Work in manageable areas which can be removed within the time scale indicated by the test patch. Peelaway® Marine should not be left on longer than 48 hours when used on GRP/Gel coat substrates.
- Apply a second coat to the final tested thickness, finally lay on the poultice with printing facing outwards, gently rubbing to exclude trapped air bubbles.
Reviews
There are no reviews yet.