FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Peelaway Marine | Sample Pots (2 x 150g)
Contains 2 x 150g sample pots of Barrettine Peelaway Marine and spreader. For full details of Barrettine Peelaway Marine, please see below.
£16.59 exc VAT | £19.91 inc VAT
5 in stock
Stay Social. Connect with us.
Product Description
Peelaway Marine sample pots Antifouling Remover is specially formulated to effectively remove multiple layers of anti foul paints with one application, saving time by removing the need for repeated scraping.
Its patented water based poultice system means the product remains active and works without rapidly drying out. The special poultice blanket enables removed anti foul paint to be collected easily and so reduces boatyard contamination risk.
The light paste is easy to apply to vertical surfaces and difficult shapes. It can be applied with a brush or trowel and for larger areas an airless sprayer can be used. Always carry out a test patch before general application. Suitable for most hull types including GRP, wood, steel and concrete.
These are 150g test pots. The standard product is available here.
- Spreader included. For concrete – Wood – GRP – Metal.
Technical Information
| Weight | 0.5 kg |
|---|
Test Patch
It is essential to apply a test patch to an area typical of the surface to be stripped to ensure the results will be satisfactory. This will also indicate the dwell time required and thickness of paste to be applied.
Application
Apply evenly with Airless spray, brush or trowel working into crevices, including on wooden hulls where planks overlap, ensuring raised edges and corners are covered well.
Apply a second coat to the final tested thickness, finally lay on the poultice with printing facing outwards, gently rubbing to exclude trapped air bubbles.
Work in manageable areas which can be removed within the time scale indicated by the test patch. Peelaway® Marine should not be left on longer than 48 hours when used on GRP/Gel coat substrates.
Removal
Slide scraper into paste and paint, keeping the paint, paste and cover together as much as possible.
Take care not to gouge/scratch the gel coat. Steam cleaning or pressure washing may aid removal of residues.
Once all the old anti-fouling paint has been removed, any remaining residues of Peelaway® Marine must be cleaned/washed away.
Allow the cleaned surface to dry thoroughly before re-coating.
Reviews
There are no reviews yet.