Stay Social. Connect with us.
We accept most major credit/debit cards and e-wallets
FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Coo-Var Hammercote Aerosol – Smooth Finish
An aerosol equivalent to Hammercote Smooth, a durable coating designed for use on metal.
- Suitable for Metal
- Volume: 400ml
- Up to 150°C heat resistance
- Smooth Gloss Finish
£7.21
Product Description
Coo Var Hammercote Aerosol is an aerosol equivalent to Hammercote Smooth, a durable coating designed for use on metal that provides resistance to rust and temperatures of up to 150°C. The aerosol format is useful for smaller or hard to reach areas. It is suitable for a variety of metal surfaces, including metal railings and fences, gates, boats and radiators.
Touch dry in 30 minutes and hard dry in 6 hours.
For full details, please see the datasheets or contact us via the online chat, phone or email for any questions about this item or to check stock.
Surface Preparation
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed but hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with solvent before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
Mixing Instructions
Mix well before use
Application Conditions
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Preceding Coat
Direct to prepared metal or Rapidry Zinc Phosphate Primer.
Subsequent Coat
Hammercote Smooth Finish Aerosol
Remarks
Apply a minimum of 2 coats. By Brush: apply a thin coat briskly direct to the surface. Leave to dry for 15-30 minutes before re-coating with a full coat. By Spray: thin carefully to required consistency (if in doubt consult Coo-Var Technical Services). Apply a mist coat followed by a full coat after 2-4 minutes. When applying additional coats (e.g. on rough surfaces), re-coat as soon as the coat is dry – usually within 15-30 minutes. Any further coats should be applied as soon as possible but certainly within 4 hours after which time the Hammercote will have started the curing period.
Estimated Coverage
4sqm per 400ml can
Reviews
There are no reviews yet.