Carboxide Red Oxide Primer is a traditional (red lead free paint) solvent based, air drying primer which gives a smooth, protective surface to metal and wood. Our primer is a multi purpose, high build, rust inhibiting primer. Perfect for use on ferrous metal surfaces; also ideal for use on wood and other surfaces. With its rust inhibiting properties and because it is touch dry in 3 hours. It is a great, practical choice for steel and iron surfaces. Make sure the paint cures sufficiently before applying a top coat; see the technical information for more detail on this.
Apply by brush, roller or conventional or airless spray. If painting non ferrous or galvanised metal, use Mordant Solution or Etching Primer. If you’re unsure about which primer to use, try our online chat or drop us an email: sales@palatinepaints.co.uk.
Carboxide primer is lead free and replaces the traditional ‘red lead’ with all the same protective qualities. Red lead paint while not actually banned is harmful to health and is a much safer alternative. If you’re concerned about working with painted surfaces that may contain lead, refer to this guide from the British Coatings Federation
Non-Ferrous/Galvanised Metals: This primer should not be applied directly. Use a Mordant Solution (T-wash) or an Etching Primer first to ensure proper adhesion.
Wood: Ensure the surface is clean. A minimum of two coats is recommended for wooden surfaces.
Environmental Conditions: Best results are obtained in warm (minimum 10°C) and dry conditions. Do not apply if the temperature is below 10°C.
Test Patch: Carry out a test patch (~100x100mm) to check compatibility with previous coatings.
Application
Mixing: Stir thoroughly for approximately 2 minutes using a drill stirrer or a wooden batten (at least 25mm wide).
Methods: Brush/Roller: Apply an even coat. Use a short-to-medium pile roller for smooth surfaces and a long pile roller for others. Spray: If using airless or conventional spray, thin the primer by no more than 15% by volume using Palatine White Spirit.
Coats: Ensure the primer cures sufficiently before applying a top coat.
Please note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently. Sample pots are available to order upon request. Always carry out a test patch (approximately 100x100mm) before full application to ensure compatibility with previous coatings and the substrate, and to ensure the colour achieved meets your requirements. Failure to do so will result in a product refund claim not being accepted.
Overcoat: after 24 hours. Keep coated areas dry for a minimum of 24 hours following application. Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Thinning and Cleaning
Thinning: Dilute up to 15% with Palatine White Spirit (specifically for spray application).
Cleaning: Clean all equipment immediately after use with Palatine White Spirit.
If using more than one batch of the same colour, intermix before use. If painting non-ferrous or galvanised metal, use Mordant Solution or Etching Primer first. For wood, a minimum of two coats is recommended.
Q: What is Palatine Carboxide Red Oxide Primer?
A: This is a traditional, lead-free, high-build solvent-borne primer designed to create a protective, rust-inhibiting layer on metal and wood surfaces.
Q: Is this product a direct replacement for old-fashioned “red lead” paint?
A: This modern formulation replaces traditional red lead with a safer, lead-free alternative that provides the same high-quality protective properties without the associated health risks.
Q: On which surfaces can I effectively use this primer?
A: It is ideal for ferrous metal surfaces such as steel and iron, but it is also highly effective as a tough primer coat for wooden surfaces.
Q: Can I use this primer on galvanised or non-ferrous metals?
A: You should not use this as your primary coating for these surfaces; instead, you must first apply a Mordant Solution (T-Wash) or an Etching Primer to ensure the paint adheres properly.
Q: Should I thin the paint if I am using a spray gun?
A: If you choose to spray the product, you should thin it by no more than 15% by volume using Palatine White Spirit.
1 review for Red Oxide Primer Paint
Rated 5 out of 5
peter woodcock (verified owner)–
hi,i have had a chance to start using the red oxide primer and i have found it to be easy to use,minimal odour,and goes on to the steel so easy.excellent product
To provide the best experiences, we and our partners use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us and our partners to process personal data such as browsing behavior or unique IDs on this site and show (non-) personalized ads. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Click below to consent to the above or make granular choices. Your choices will be applied to this site only. You can change your settings at any time, including withdrawing your consent, by using the toggles on the Cookie Policy, or by clicking on the manage consent button at the bottom of the screen.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
peter woodcock (verified owner) –
hi,i have had a chance to start using the red oxide primer and i have found it to be easy to use,minimal odour,and goes on to the steel so easy.excellent product