FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Zenova Primer
An acrylic base coat designed to be used before Zenova IP, IR and FP.
- For indoor and outdoor use
- Suitable for surfaces including concrete, plasterboard, wood and metal
- Apply by brush, roller or airless spray
Please allow 1-2 working days for delivery of 20L and 25L items when selecting next day delivery.
£83.53 – £241.84
Stay Social. Connect with us.
Product Description
Zenova Primer is an acrylic base coat designed to be used before Zenova IP, IR and FP. It can be used on a variety of surfaces including concrete, plasterboard, wood and metal.
Before application, surfaces need to by smooth, dry and clean of dust. The estimated coverage of Zenova Primer is 50 – 100g per sqm.
Once applied, the primer takes approximately 1 – 2 hours to dry, after which the topcoat can be applied.
For full details, please see the datasheets.
Please note: the 10 Litre option is supplied as 2 x 5 Litre tins.
Product Documents
Download
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Zenova Primer”
Reviews
There are no reviews yet.