FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Zenova FP Intumescent Paint
a water based intumescent paint that protects surfaces against fire.
- For indoor and outdoor use
- Suitable for surfaces including wood, metal and spray polyurethane foam
- Available in custom colours, please contact us for more details
Please allow 1-2 working days for delivery of 20L and 25L items when selecting next day delivery.
£135.95 – £406.36
Stay Social. Connect with us.
Product Description
Zenova FP is a water based intumescent paint that protects surfaces against fire. When applied, it forms a thermoresistant and non flammable insulating layer that protects the surface from the heat and damage of a fire.
Zenova FP can be used on a range of surfaces, including wood, metal and spray polyurethane foam. It can be applied to indoor or outdoor surfaces, while some outdoor surfaces may also require an approved top coat.
The estimated coverage of Zenova FP is 830 – 1300ml per sqm, however this depends greatly on the surface, equipment and building type. The drying process can take 1 – 24 hours per layer, depending on humidity and temperature. Designed to be used after Zenova Primer.
For full details, please see the datasheets.
Please note: the 10 Litre option is supplied as 2 x 5 Litre tins.
Product Documents
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Zenova FP Intumescent Paint”
Reviews
There are no reviews yet.