Product Description
Insulating Paint in the UK is more prevalent with the increase in energy prices and the need to reduce the impact on global warming. For that reason Palatine paints have partnered with Zenova to offer products that comply with latest UK fire safety standards, and UK building regulations.
For the purpose of easy application with roller, brush or airless spray-gun. In addition this product has excellent adhesion to any surface, and requires only a thin layer; 1 mm DFT advised
Greatly reduces heating and cooling costs and energy usage. Quick to apply by existing tradespeople. Undisruptive to residents and buildings. in addition to enhancing appearance by giving a high quality freshly redecorated property. A cost-effective, undisruptive, simple and green approach to improving insulation. Supports the ‘fabric first’ approach to insulation. Helps improve building energy efficiency and EPC rating.
Presents outstanding properties of thermal insulation internally and externally, thermal reflection of sunrays and infrared radiation, anti-condensation and anti-mold characteristics.
pipes, ducting. Offers protection against humidity, very high and very low temperatures. Eliminates thermal bridging and water capillarity.
Designed for use following application of Zenova Primer.
Please note: the 10 Litre option is supplied as 2 x 5 Litre tins.
For large projects
Please email [email protected] or telephone 01942 884122.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Reviews
There are no reviews yet.