FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Palatine Professional Exterior Satin Paint
A durable alternative to Professional Satin Paint designed for outdoor use.
- Suitable for wood and metal
- Apply by brush, roller or spray
- Touch dry in 3 hours and hard dry in 8 hours
<li
>RAL Classic, BS 480
- 0 and BS 381C colours also available
£14.32 – £65.88
Stay Social. Connect with us.
Product Description
Our Exterior Satin Paint is an alternative to our Professional Satin Paint that is more suitable for outdoor use. Its unique formulation gives it additional durability, allowing it to better withstand the elements. Exterior Satin Paint is available in a wide variety of colours, including black, white, anthracite grey and many more.
Exterior Satin is suitable for both wood and metal, making it ideal for many projects, such as sheds and other wooden structures (for a matt finish, see Professional Shed & Fence), benches or metal railings.
With many exterior satin paint colours available, including black, white and several shades of greys and blues, you can find a colour to match your tastes or project. If the colour you’re looking for isn’t here, please contact us as we can also provide colour matching to RAL Classic, BS 4800 and BS 381C colour charts.
Colours Available: 33 Standard, BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 1 Litre, 2.5 Litre, 5 Litre.
Coverage / Drying Times:
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Reviews
There are no reviews yet.