FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Mould Resistant Paint Matt – Protection Paints Mould-Guard
A mould and mildew resistant paint for indoor walls and surfaces, such as bathrooms, basements and utility rooms.
- Scuff, scrub and fade resistant
- Matt finish
- Available in RAL classic, BS 4800 and BS 381C colours
£28.44 – £31.69
Stay Social. Connect with us.
Product Description
Mould-Guard is a mould resistant paint for indoor walls and surfaces, such as bathrooms and basements. It provides a matt finish and protects rooms from mould and mildew build up.
Mould can easily build up in rooms and areas with a high level of moisture and poor air circulation, such as bathrooms and basements. If not removed, it can then cause a number of health issues, such as skin irritation and breathing difficulties.
For a more effective mould resistant paint to remove black mould in a satin finish, please see Zero-Mould Anti Mould Paint. We also have a range of other hygiene coatings available, including anti-viral systems that prevent viruses and bacteria from lingering on indoor surfaces.
Mould-Guard mould resistant paint is available in RAL classic, BS 4800 and BS 381C colours. This allows you to have protection from mould and the colour you want in the same paint.
Please Note: If ordering a colour other than white, please select the ‘colour’ option. Then, leave the desired colour code in the notes section at the checkout. A colour chart can be found in the data sheets tab.
Product Documents
Download
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Mould Resistant Paint Matt – Protection Paints Mould-Guard”
You may also like…
Hygiene Coatings
£58.51 – £165.01
Hygiene Coatings
£71.26 – £134.26
Hygiene Coatings
£63.39 – £213.01
Reviews
There are no reviews yet.