FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*

Primer for Epoxy Floor Paint

Use Primer for Epoxy Floor Paint as a primer for concrete before applying Epoxy Floor Paint. Epoxy floor paint primer has excellent adhesion ensuring it is a suitable epoxy primer for concrete and exposed steel reinforcement

- Low viscosity = easy application
- Excellent adhesion to a variety of substrates
- Great “wetting out” and penetration properties
- Low odour = suitable for use in food factories
- Good curing performance at low temperatures
- Container Size: 5kg

From £81.20 Incl. VATFrom £67.67 Excl. VAT

Stay Social. Connect with us.

Primer for Epoxy Floor Paint is designed as a primer for concrete before applying Epoxy Floor Paint. The epoxy floor paint primer is based on a blend of epoxy resin and curing agent binder. This gives the low viscosity necessary to wet the substrate and enable good penetration.

Designed for use on a variety of surfaces including concrete and masonry. Comes in a gloss finish. If your floor is in poor condition or is concrete that has not been previously painted or matured, use the primer for epoxy floor paint to ensure Primer for epoxy floor paint provides excellent adhesion and durability, making it the perfect base for epoxy floor paint applications

Low viscosity means easy application
Excellent adhesion to a variety of surfaces
Great “wetting out” and penetration properties
Low odour means it is ideal for use in food factories
Good curing performance at low temperatures

Need more information about epoxy floor primer or not sure which coating you need? Ask Jeff – has some information

Container Size: 5kg

ghs09 ghs 07

TECHNICAL DATA

Mixed viscosity of binder @ 25°C – Poise 3 – 6
Minimum application temperature ° C 5
Usable time (1.0kg mix) @ 20°C 35 – 40 minutes (Fast Cure – 20 minutes)

Epoxytread Solvent Free Primer is supplied in 4.50kg units.

(Approximate coverage is 25m² per 5.0kg unit).

(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)

Surface preparation

New concrete should be at least 21 – 28 days old or the moisture content less than 5%.
The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion.

Techniques should include (depending on degree of contamination) acid etching, light mechanical scabbling, blasting, grinding or degreasing.

Existing concrete floors should be sound, preparation methods may involve the patching of floor areas with Epoxytread Patch Repair System.

Epoxytread Solvent Free Primer is applied to the prepared substrates by roller or brush, ensuring a continuous film. Avoid over-application and puddles. Porous floors may require two coats.

MIXING

Epoxytread Solvent Free Primer is supplied in pre-weighed packs. Add all the contents of Curing Agent Component B to Epoxy Resin Component A and mix thoroughly. Once mixed the primer should be immediately applied. Epoxytread Solvent Free Primer should be allowed to become tack free prior to the application of Epoxytread Self-levelling Flooring System No 2 and Epoxytread Solvent Free Coating.

CLEANING

Epoxytread Tool Cleaning Solvent should be used to clean tools – do not use on hands.