Product Description
Xylene Thinners (Mixed Xylene Solvent)
Carbosolv Xylene Thinners is a strong aromatic solvent commonly used in the coatings industry as a xylene paint thinner and for cleaning paint equipment. It’s used to reduce viscosity in compatible solvent-based products and to help with tool and equipment clean-down.
Common uses:
Carbosolv Xylene Thinners is a mixed xylene solvent used in the coatings industry as a paint thinner and for cleaning equipment after using compatible solvent-based products.
- Thinning compatible solvent-based paints and coatings (improves flow for brush or spray)
- Cleaning tools and equipment after painting
Compatibility matters: xylene is not universal. Therefore, always check the product label/TDS for compatibility before thinning. or contact us and we’ll confirm suitability. We use xylene paint thinners to thin several of our paints, including:
Cleaning Tools & Equipment
Xylene solvent can be used for cleaning tools and equipment after using compatible solvent-based coatings. Use in well-ventilated areas and follow all safety guidance.
Safety & Handling
This product is flammable and must be handled and stored correctly. Follow the label and SDS guidance, use suitable PPE, and keep away from heat/ignition sources.
Request a Bulk Trade Quote
As a UK manufacturer, we provide wholesale pricing for large volume orders. Complete the form below for a rapid quote.
Preparation
Surface Cleaning: Xylene is a high-strength solvent effective for removing paint residues, stains, grease, and other contaminants. For pre-treatment, wipe the surface with a lint-free cloth moistened with the thinner to ensure the area is clean before painting.
Compatibility Check: This is a strong chemical solvent. Only use with solvent-resistant brushes and rollers. Do not use with standard foam rollers, as the solvent can dissolve or damage them.
Safety Setup: Ensure the workspace is well-ventilated. Wear appropriate PPE, including solvent-resistant gloves and eye protection.
Application & Thinning
Target Paints: Specifically designed for thinning high-performance coatings such as:
* Fast Dry Gloss, Fast Dry Semi-Gloss, and Metal Primers.
* Hammershield (Smooth & Hammered).
* Carbochlor Chlorinated Rubber Paint.
Thinning for Spraying: Always refer to the specific paint’s Technical Data Sheet (TDS) for exact ratios, but typical guidelines are:
* Top Coats: Approximately 1 part thinner to 10 parts paint (10% dilution).
* Primers: Approximately 1.5 parts thinner to 10 parts paint (15% dilution).
Mixing: Add the thinner gradually to the paint while stirring continuously to achieve a smooth, even consistency for spraying or brushing.
Cleaning
Equipment: Ideal for cleaning spray guns, brushes, and metal trays immediately after using oil-based or industrial paints.
Maintenance: After cleaning spray equipment, flush a small amount of clean xylene through the gun to ensure no paint residue remains in the internal valves or nozzles.
Safety & Storage
Flammability: Xylene is highly flammable with a flash point of approx. 30°C. Keep away from heat, sparks, open flames, and hot surfaces. No smoking during use.
Storage: Store in the original tightly closed container in a cool, dry, well-ventilated place (ideally between 5°C and 25°C). Keep the container upright to prevent leakage.
Health Hazard: Avoid breathing vapours or spray mist. If swallowed, do not induce vomiting and seek medical medical attention immediately.
Q: What is the main purpose of Carbosolv Xylene Thinners?
A: This is a high-strength solvent used to thin oil-based paints, varnishes, and enamels, ensuring a smooth and even application when spraying or brushing.
Q: Which Palatine Paints products is this thinner specifically designed for?
A: It is used for our range of fast-drying paints (Gloss, Semi-Gloss, and Metal Primer), as well as Hammershield and Carbochlor chlorinated rubber paint.
Q: Can I use this thinner to clean my painting equipment?
A: Yes, its strong dissolving power makes it excellent for cleaning spray guns, solvent-resistant rollers, and brushes after using oil-based or industrial paints, always check if it is compatible with the products you are cleaning.
Q: Is Xylene suitable for use on all types of rollers?
A: No, you should only use it with solvent-resistant rollers and brushes, as the strong chemicals can dissolve or damage standard foam rollers.
Q: Can this product be used in the printing industry?
A: Yes, it is widely used in ink manufacturing to dissolve resins and pigments, helping to improve ink stability and maintain consistent colours.
A: Carbosolv Xylene Thinners is a mixed xylene solvent used to thin compatible solvent-based paints and coatings, and to help clean tools and equipment after using compatible products. Always check compatibility before use.
Q: Is xylene the same as xylol?
A: Xylene is commonly referred to as xylol in the coatings and solvent industry. In practice, people often use the terms interchangeably. If you need a specific grade/spec, check the SDS or contact us.
Q: Can I use xylene thinners to thin paint?
A: Yes — if the paint/coating is compatible with xylene. Add small amounts at a time, mix thoroughly, and test before full application. If you’re unsure, tell us what product you’re using and we’ll advise.
Q: Which Palatine Paints products is this thinner designed for?
A: We use xylene thinners to thin several Palatine Paints products, including: Fast Dry Gloss, Fast Dry Semi Gloss, Fast Dry Metal Primer, Hammershield Smooth, Hammershield Hammered, and Carbochlor Chlorinated Rubber Paint.
Q: Can I use xylene solvent to clean my painting equipment?
A: Xylene solvent can be used to clean tools and equipment after using compatible solvent-based coatings. Use in a well-ventilated area, follow safety guidance, and always check the coating you’re cleaning is suitable for xylene.
Q: What’s the difference between xylene and white spirit?
A: They’re different solvents used for different products. Xylene is a stronger aromatic solvent often used with specific industrial coatings, while white spirit is commonly used with many general solvent-based paints. Always follow the coating manufacturer’s recommended thinner.
Q: Is xylene suitable for all rollers and brushes?
A: Not always. Use solvent-resistant rollers, brushes and seals where appropriate, as some plastics/foams can soften or degrade with strong solvents. If in doubt, test on a small area first.
Q: What sizes are available?
A: Select your required size from the options on this page. If you need help choosing the right quantity for your job, contact us.
James McCarthy –
Fantastic product can be used with hammerite metal paints a lot cheaper than hammerites own brand cleans the brushes well and thins the metal paint well if required I bought the 5L great value for the price Palatine Paints is the place to Go