Floor Preparation
Workwear & PPE
Rust Treatment
Workwear & PPE
Rust Treatment
Palatine Fast Drying Gloss
FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
High performance, direct to metal coating that provides an excellent gloss finish top coat, ideal for spray application.
Please allow 1-2 working days for next day delivery of 20L items. This is due to the operation times of the hazardous goods vehicles of the external couriers.
From £22.89 Excl. VAT
Stay Social. Connect with us.Â
Fast drying gloss is our high performance, direct to metal gloss quick dry industrial paint. It provides an excellent quick dry gloss finish top coat which is ideal for spray application. Fast dry gloss is solvent borne and is ideal for use on steel work, railings, skips, containers and industrial machinery. Fast dry gloss paint has a tough decorative finish which dries fast, in fact it is touch dry in 20 minutes. Use over Palatine Paints Fast Dry Metal Primer which is high build and anti-corrosive.
Palatine Multipurpose thinners are ideal for spray application of this paint.
Please note: The colours shown here are only a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
We are a proud member of the British Coatings Federation.
Colours Available: BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 2.5 Litre, 5 Litre, 20 Litre.
Coverage / Drying Times:
Surface Dry: 15 minutes
Overcoat: after 1 hour
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
Thinning and Cleaning: Use Multi Purpose Thinners.
If using more than one batch of the same colour, intermix before use
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
For non-ferrous metals use Palatine Fast Dry etching primer.
A test area on unknown previously painted surfaces must be carried out prior to full application
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine Multi Purpose Thinners by volume.
Apply an even coat using a brush (rapid strokes) or a solvent resistant roller.
Milking Parlour Wall Paint
Farm Oxide Paint
Reviews
There are no reviews yet.