FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Multi Purpose Thinners Painting Accessory Bundle
Multi Purpose Thinners Painting Accessory Bundle – The perfect paint job not only requires a high standard of paint but also the painting accessories to help ease the job – So we have put them all in one place to buy! No messing about trying to navigate through the endless equipment lists.
The bundle consists of;
- 1 x 1L Multi Purpose Thinners
- 1 x 5L Scuttle
- 1 x 4″ Brush Prodec All Purpose
- 1 x 2″ Brush Prodec All Purpose
£12.23 exc VAT | £14.68 inc VAT
100 in stock
Stay Social. Connect with us.
Product Description
Multi Purpose Thinners Painting Accessory Bundle – The perfect paint job not only requires a high standard of paint but also the painting accessories to help ease the job – So we have put them all in one place to buy! No messing about trying to navigate through the endless equipment lists.
The bundle consists of;
- 1 x 1L Multi Purpose Thinners
- 1 x 5L Scuttle
- 1 x 4″ Brush Prodec All Purpose
- 1 x 2″ Brush Prodec All Purpose
This bundle is suitable for use with a range of our paints, including:
- Fast Dry Gloss
- Fast Dry Metal Primer
- Fast Dry Semi Gloss
- Hammershield
For paints not listed above, the accessory button on the product page will take you to the correct bundle for the paint.
If you have any queries relating to which bundle solvent you require please do contact our friendly team for support and advice.
Product Documents
Download
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Multi Purpose Thinners Painting Accessory Bundle”
You may also like…
Hammerite Paint
£5.97 – £667.50
Reviews
There are no reviews yet.