Substrate
Painting Equipment
Clearance
Industrial Coatings
Body Shop Primer
2K PU Repair
Clearance
Industrial Coatings
Body Shop Primer
2K PU Repair
Clearance
Industrial Coatings
Zinc rich primer is a cold galvanising paint for iron and steel; use as a self-finish coating or a durable rust inhibiting primer beneath many of our top coats. Suitable for all ferrous metals, such as carbon steel, stainless steel, mild steel, cast iron and wrought iron.
£16.87 – £141.05Price range: £16.87 through £141.05
Zinc rich primer is a cold galvanising paint for iron and steel; use as a self-finish coating or a durable, weld through rust inhibiting primer beneath many of our top coats. Suitable for all ferrous metals, such as carbon steel, stainless steel, mild steel, cast iron and wrought iron.
Recommended for the protection of: structural steel work; agricultural and construction plant and machinery. Also great for gates, railings, iron, pipework. Helps prevent rust and corrosion where existing galvanised surface has been damaged by cutting or after welding as a weld through primer.
Allows conductivity as a dried film. Touch dry in 3 hours. Suitable for brush or spray application. For small areas or damage repairs see Bright Zinc Cold Galvanising Spray
Need more information on what zinc galvanising paint is for, or which metal primer to use? Take a look at our Blog “Which Metal Primer to Use and When?”
Our zinc rich primer is a ‘galvafroid’ equivalent. Also known as weld through primer with it’s unique formulation and high quantity of ultra fine premium quality zinc dust. The zinc acts in a sacrificial manner when in direct contact with the iron or steel substrate and providing galvanising properties.
Please note: This primer should not be used on surfaces that have been treated with phosphoric acid.

Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces.
Please note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently. Sample pots are available to order upon request. Always carry out a test patch (approximately 100x100mm) before full application to ensure compatibility with previous coatings and the substrate, and to ensure the colour achieved meets your requirements. Failure to do so will result in a product refund claim not being accepted.
Colours Available: Metallic Grey
Pack Sizes: 500ml, 1 Litre, 2.5 lItre, 5 Litre
(Based on standard conditions of 20°C)
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours. Keep coated areas dry for a minimum of 24 hours following application. Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 7 as self finishing- 14m² as a primer per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Thinning: Use Palatine Multi-Purpose Thinners.
Cleaning: Use Palatine Multi-Purpose Thinners.
If using more than one batch of the same colour, intermix before use.
Q: What is the main purpose of Carbogalv Zinc Rich Primer?
A: This is a high-performance “cold galvanising” paint used to protect iron and steel from rust. It contains a high level of zinc dust which acts sacrificially to stop corrosion even if the surface is scratched.
Q: What types of metal is this primer suitable for?
A: It is designed for all ferrous metals, including mild steel, carbon steel, cast iron, wrought iron, and even stainless steel.
Q: Can I use this on areas that have been welded?
A: Yes, it is an excellent “weld-through” primer and is ideal for protecting areas where the original galvanised surface has been damaged by cutting or welding work.
Q: Is this primer suitable for outdoor structures?
A: Yes, it provides exceptional weather resistance and is commonly used on structural steelwork, agricultural machinery, garden gates, and metal railings.
Q: Can I use this primer on surfaces treated with phosphoric acid?
A: No, you should avoid using this specific zinc-rich primer on surfaces that have been treated with phosphoric acid rust removers, as it may affect the performance.
Aerosols
Anti Rust Primer
Bitumen Paint
Industrial & Plant
Etching
Decorative Paint
To provide the best experiences, we and our partners use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us and our partners to process personal data such as browsing behavior or unique IDs on this site and show (non-) personalized ads. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Click below to consent to the above or make granular choices. Your choices will be applied to this site only. You can change your settings at any time, including withdrawing your consent, by using the toggles on the Cookie Policy, or by clicking on the manage consent button at the bottom of the screen.
Robert –
This seems to be an excellent quality zinc-rich primer – very heavy weight gives a clue – and easy to apply.
Charles Ware –
Good product, well packed, thanks (1 Litre)