Trutex Masonry Paint

Palatine Trutex Masonry Paint is a high quality, full bodied, durable water based coating, providing excellent protection against weathering, dirt and pollution.




Stay Social. Connect with us. 

Trutex Masonry Paint is a high quality, durable, water based, weather resistant coating. It gives your masonry excellent protection against weathering, dirt and pollution. Trutex Masonry Paint provides an economical alternative to Pliocem, our solvent based masonry paint. Use it for both interior and exterior masonry to create a smart, breathable, weather resistant finish.

Our masonry paint has high opacity and excellent coverage power; this means that your surfaces will look fresher for longer. Unsure which masonry paint to use? Our water based masonry paint is generally the right choice. If you don’t have the luxury of applying your paint in dry weather conditions however, use our Pliocem Masonry Paint

Application: Roller, Brush, Paint Pad, Conventional Spray, Airless Spray.
Colours Available: White, Magnolia as ready mixed. Sandtex Colours, BS 4800, BS 381C, Ral Classic and NCS.
Pack Size: 5L, 10L
Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface dry: 30 minutes @ 20ºC
Overcoat: After 2 hours @ 20ºC (temperature dependent).
Theoretical Coverage: 12.5² per litre applied at 80uM WFT (wet Film Thickness).
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Storage: Store in temperature range 5-40ºC
Thinners: Use clean cold water
If you have any questions or require any further assistance, please contact us on 01942 884122 or email [email protected]

If you’re still unsure which masonry paint to choose, give us a call or use our online chat. You can also fine some useful information on Decorating Advice website. 

Ensure all surfaces are clean, dry and free from dust, grease, etc. Gloss and oil painted surfaces should be washed clean and rubbed down. Powder or flaky surfaces should be primed prior to painting.

On porous surfaces or new work, thin the paint with up to 20% clean water for the first coat (avoid over thinning).

Stir well prior to application.

By brush – load generously and avoid over spreading.

By roller – load generously and apply evenly. A deep pile roller should be used on textured surfaces.

Cleaning: Clean application immediately after use. Use clean cold water.


There are no reviews yet.

Be the first to review “Trutex Masonry Paint”

Trutex Masonry Paint 5L
Trutex Masonry Paint
£32.40£58.91 Select options
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.