Pliocem® Masonry Paint is a smooth finish, weather resistant, solvent borne masonry paint for exterior surfaces. It is easy to apply and provides good coverage while being much more tolerant to damp/cold weather during application than traditional water-based exterior masonry paints. Available in 15 attractive colours, or we can match to your chosen shade.
High performance, solvent-borne Pliolite® based masonry paint
Formulated as a protective, decorative top coat for exterior use
Provides a long lasting coating with excellent adhesion and resistance to moisture and alkali attack
Rainproof in 20 minutes
For more information see the full description below.
Pliocem® Pliolite Masonry Paint is a solvent-borne, Pliolite® based masonry paint formulated for weather protection and an attractive, decorative finish. Forming a tough, durable film with superior weathering for exterior use, Pliocem adheres well and acts as a barrier against water and CO2 attack. Use Pliocem® Pliolite Masonry Paint on cement rendering, rough cast, brick, or concrete exterior walls and structures. Apply to new or previously painted masonry to give a high quality, smooth finish. A great advantage of this masonry paint is that it can be used in low temperatures and when rain is imminent.
Pliocem® Masonry Paint Highlights:
Rainproof in 20 minutes
Long lasting, weather resistant masonry paint
Excellent adhesion and a coverage of 8m² per litre
Resistant to moisture or alkali attack
Tolerant to damp and cold weather during application
Enhance and protect exterior walls of houses, garages, office buildings and garden structures with a stylish, decorative finish in a wide range of colours including: anthracite grey; black; white; brick red; olive green; silk grey; cotton cream; deepstone; greystone and more. To see an example of each colour, select the size and click on the each colour – a swatch will appear to the side. If the colour you want is not listed, add your chosen colour code from the RAL Classic or BS381c/4800 ranges and we will match it for you. (NB. Certain colour shades may attract an additional charge but we will contact you before processing if this is the case).
Porous Surfaces: Pliocem® Pliolite Masonry Paint performs best on porous surfaces when used with our Pliocem Concrete Sealer.
Please note: The colours on the product listings are only given as a guide, this is due to the fact that every computer monitor has a different capability to display colours and that everyone sees these colours differently. Prior to purchase, shade cards are available for these products, which will show a more accurate colour match than is available on a screen. If you require a shade card then please contact us on 01942 884122 or email firstname.lastname@example.org
Apply with our twin head masonry kit:
Colours Available: BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 500 ml, 1 Litre, 2.5 Litre, 5 Litre.
Coverage / Drying Times:
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Palatine Yacht Varnish is a tough, traditional varnish for new, previously painted, stained or varnished surfaces. Its quality and high gloss finish means it’s perfect for yachts, boats and other exterior wood projects.
Protects exterior wood
Protects new, previously painted, stained and varnished surfaces
Extremely durable – resists cracking and blistering
High gloss finish
Touch dry in 2 hours which provides excellent wet edge and flow out
Supercote Trade Matt Emulsion is a full bodied matt emulsion formulated to provide an economical, trade quality finish. With high opacity and coverage power it is ideal for interior walls & ceilings in residential, commercial and factory settings.
Palatine Trutex Masonry Paint is a high quality, full bodied, durable water based coating, providing excellent protection against weathering, dirt and pollution. Formulated as an economical alternative to our Pliocem Pliolite based masonry paint. For Interior & Exterior use, with high opacity/coverage power. See below for more information. If you’re unsure about which masonry paint to use, please call us or use our online chat facility.