FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*

Truflat Contract Emulsion Paint

Palatine Truflat Contract Emulsion Paint is an economical full bodied matt emulsion
Formulated to provide an economical solution making it ideal for new work application
For Interior Walls & Ceilings.
For residential, commercial and factories.

From £19.46 Incl. VATFrom £16.22 Excl. VAT

Stay Social. Connect with us.

Palatine Truflat Contract Emulsion Paint is an economical full bodied matt emulsion

Formulated to provide an economical solution making it ideal for new work application
For Interior Walls & Ceilings.
For residential, commercial and factories.

Brand Palatine Paints

Available finish Matt

Substrates Plaster , Wallcoverings, Blockwork , Brickwork, Concrete and previously painted surfaces.

Drying time Touch dry: 30 Minutes

If you have any questions or require any further assistance, please contact us on 01942 884122 or email [email protected]

Application: Roller, Brush, Paintpad Conventional Spray, Airless Spray.

Colours Available: White and Magnolia

Pack Size: 5 litres, 10 litres, 15 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.

Surface dry @ 20ºC: 30 minutes

Overcoat@ 20ºC: After 2 hours (temperature dependent).

Theoretical Coverage: 12 – 14m² per litre.

(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)

Storage: Store in temperature range 5-40ºC

Thinners: Use clean cold water

If you have any questions or require any further assistance, please contact us on 01942 884122 or email [email protected]

Product Documents

Download

Emulsion Paint

Ensure all surfaces are clean, dry and free from dust, grease, etc. Gloss and oil painted surfaces should be washed clean and rubbed down. Powder or flaky surfaces should be primed prior to painting.

On porous surfaces or new work, thin the paint with up to 20% clean water for the first coat (avoid over thinning).

Stir well prior to application.

By brush – load generously and avoid over spreading.

By roller – load generously and apply evenly. A deep pile roller should be used on textured surfaces.

Cleaning: Clean application immediately after use. Use clean cold water.

Reviews

There are no reviews yet.