Supercote Trade Matt Emulsion provides an economical trade quality matt finish. High opacity and one coat coverage power make it ideal for jobs where efficiency and speed are necessary. Suitable for interior walls & ceilings in residential, commercial and factory settings. Use also as a matt emulsion paint on new plaster work and breeze blocks.
- One coat application
- High opacity
- Ideal on new plaster work
- Quick drying
This emulsion is perfect for covering large areas quickly whilst creating a smooth and professional finish.
For the full range of emulsions we supply, see here. Supercote Trade Matt Emulsion is a practical choice because it is suitable for application by brush, roller, pad or spray. If you’re wondering which roller to use, our selection is vast.
In general, foam or short pile rollers are best for smooth surfaces. Whereas longer pile rollers are definitely better for rougher or textured surfaces. Natural fibres like sheepskin are known for good pick up and release qualities. Check out the BCF’s surface preparation tips.
Application: Roller, Brush, Paintpad Conventional Spray, Airless Spray.
Colours Available: White and Magnolia
Pack Size: 5 litres, 10 litres, 15 litres
Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface dry @ 20ºC: 30 minutes
Overcoat@ 20ºC: After 2 hours (temperature dependent).
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Storage: Store in temperature range 5-40ºC
Thinners: Use clean cold water
If you have any questions or require any further assistance, please contact us on 01942 884122 or email [email protected]
Ensure all surfaces are clean, dry and free from dust, grease, etc. Gloss and oil painted surfaces should be washed clean and rubbed down. Powder or flaky surfaces should be primed prior to painting.
On porous surfaces or new work, thin the paint with up to 20% clean water for the first coat (avoid over thinning).
Stir well prior to application.
By brush – load generously and avoid over spreading.
By roller – load generously and apply evenly. A deep pile roller should be used on textured surfaces.
Cleaning: Clean application immediately after use. Use clean cold water.