Product Description
The ProDec 9″ Masonry Roller is the best roller for masonry paint, designed to deliver professional results on rough and textured surfaces. Whether you’re working on brick, breeze block, or render, this masonry roller ensures efficient and even coverage.
Key Features:
- Heavy-Duty Performance: Specifically engineered for tough surfaces. The ProDec 9″ Masonry Roller is your go-to tool for applying masonry paint. Its robust construction guarantees durability and longevity, even with frequent use.
- Efficient Coverage: The 18mm long pile fabric is perfect for picking up and releasing large amounts of paint. This reduces the number of coats needed. This makes it the best roller for masonry paint, saving you time and effort.
- Versatile Use: Not just for exterior walls, this masonry paint roller is also ideal for interior emulsions, making it a versatile addition to your painting toolkit.
- Durable Construction: Built to withstand heavy-duty use, the roller features a padded core and a sturdy frame, ensuring it remains reliable over time. It’s also compatible with extension poles for those hard-to-reach areas.
- Eco-Friendly: The included paint tray is made from 100% recycled plastic, making it an environmentally conscious choice.
Get the Job Done Faster and Better:
With the ProDec 9″ Masonry Roller, you can achieve a flawless finish on any masonry surface. Its superior design and performance make it the best roller for masonry paint, ensuring your projects are completed with ease and efficiency.
Preparation:
To ensure a durable and effective bilge paint application, it’s crucial to properly prepare the surface. Start by cleaning the substrate thoroughly to remove any dirt, grease, or oil. You can use a degreaser or mineral spirits for this step. Next, inspect the surface for any rust or old paint. If present, remove the rust using a wire brush, sandpaper, grinder or suitable rust remover / treatment. For old paint, use a paint stripper or sand it down until you reach the bare metal. Once the surface is clean and free of rust and old paint, sand it with fine-grit sandpaper to create a smooth and slightly roughened surface for better paint adhesion. Finally, wipe down the steel with a clean cloth to remove any dust or debris before applying our rust-inhibitive marine primer. After the primer has dried, you can proceed with applying our high build marine undercoat and then one but preferably two coats of the bilge paint.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces.
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume.
A second coat can be applied at full strength. This will prolong the life and performance of the coating.
For application onto wooden surfaces, a minimum of two coats is recommended.
Drying Time @ 20ºC: Drying times will be extended at low temperatures.
Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface dry @ 20ºC: 1 hours
Hard dry @ 20ºC: 4 hours
Overcoat@ 20ºC: After 8 hours (temperature dependent).
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Storage: Store in temperature range 5-40ºC
Thinners: White Spirit
If you have any questions or require any further assistance, please contact us on 01942 884122 or email [email protected]
Reviews
There are no reviews yet.