Teamac Antifouling D Plus

Surface Preparation

DO NOT USE ON ALUMINIUM VESSELS. Bare Surfaces: On exposed metal and wood, prime first with at least 2 coats of Teamac Metaclor Underwater Primer (but not more than 3). On GRP lightly abrade exposed surfaces and apply 2 coats of Teamac Metaclor Underwater Primer. New steel: Abrasive blast clean to Sa2½ and apply TEAMAC METACLOR UNDERWATER PRIMER. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the METACLOR. Maintenance: Remove all loose and damaged existing coating and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with METACLOR PRIMER to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination.

Preceding Coat

Always apply at least 2 coats of Teamac Metaclor Underwater Primer

Subsequent Coat

Always apply at least 2 coats of Teamac New Antifouling ‘D’

Remarks

Users must comply fully with all their legal responsibilities under the Control of Pesticides Regulations 1986 (as amended), including complying with all conditions of approval. H.S.E. Approval No 7218. Launch time after painting – minimum 8 hours, maximum 3 months if shrouded from direct sunlight. Minimum 2 coats.

Estimated Coverage

10sqm per litre