FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Teamac Antifouling A Plus
Teamac Antifouling A Plus is an antifouling for use on the underwater surfaces of marine vessels including aluminium hulls or underwater structures.
- Suitable for GRP, Steel, Wood and Aluminium
- Apply by Brush, Roller or Spray (professionals only)
- Semi Gloss Finish
£41.59 – £117.96
Stay Social. Connect with us.
Product Description
Teamac Antifouling A Plus is an antifouling containing a high level of copper thiocyanate designed for use on underwater structures and underwater surfaces of marine vessels including aluminium hulls with a maximum speed between 25 and 30 knots. The coating has a functional life of 18 to 24 months.
This is a topcoat to be applied after Antifouling Primer.
Touch dry in 3 hours and hard dry in 18 hours. Leave 16 hours or more dependant on the film thickness before overcoating.
For thinning and cleaning, use Teamac Thinners 17
For full details, please see the datasheets or contact us via the online chat, phone or email for any questions about this item or to check stock.
Surface Preparation
On aluminium, ideally abrade the surface to provide a “key”, clean, then immediately coat with Metaclor Primer. When dry apply 2nd coat. If abrasion is not possible, the surface must be degreased and treated with ‘T’ Wash/Mordant solution (leave to react for 2 hours), follow the instructions on the pack. When this is clean and dry apply the 2 coats of Metaclor Primer, then 2 coats of Antifouling A Plus. Bare Surfaces: On exposed metal and wood, prime first with at least 2 coats of Teamac Metaclor Underwater Primer (but not more than 3). On GRP lightly abrade exposed surfaces and apply 2 coats of Teamac Metaclor Underwater Primer. New steel: Abrasive blast clean to Sa2½ and apply TEAMAC METACLOR UNDERWATER PRIMER. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the METACLOR. Maintenance: Remove all loose and damaged existing coating and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with METACLOR PRIMER to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates.
Mixing Instructions
Mix well prior to use.
Application Conditions
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination.
Preceding Coat
Always apply at least 2 coats of Teamac Metaclor Underwater Primer.
Subsequent Coat
Always apply at least 2 coats of Teamac Antifouling A Plus
Remarks
Users must comply fully with all their legal responsibilities under the Control of Pesticides Regulations 1986 (as amended), including complying with all conditions of approval. H.S.E. Approval No 8960. Launch time after painting – minimum 8 hours, maximum 3 months if shrouded from direct sunlight. Minimum 2 coats.
Estimated Coverage
10sqm per litre
Reviews
There are no reviews yet.