Palatine Stable Paint is a water-based matt finish horse stable topcoat available in black, blue, red and more. With a hard wearing durable finish and fast drying properties it makes an excellent paint for stable walls. Unlike many other brands, our horse stable paint is available in appealing colours such as blue, traditional red oxide and anthracite grey.
This product creates a breathable, water resistant finish for interior and external use.
Available in 2.5L and 5L Can Sizes
- Easy to apply and hard wearing
- High opacity and coverage power
- Touch dry in 30 minutes
- Suitable for Brickwork, Breezeblock, Plaster, Masonry, Render, Wood & Metal (Use a metal Primer)
- Protection against dirt and pollution.
- Horse Friendly of course!
Please note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
Application: Roller, Brush, Paintpad Conventional Spray, Airless Spray.
Colours Available: White, Black, Brick Red, Thunder Grey & Sapphire Blue
Pack Size: 2.5 litres, 5 litres.
Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface dry @ 20ºC: 30 minutes
Overcoat@ 20ºC: After 2 hours (temperature dependent).
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Storage: Store in temperature range 5-40ºC
Thinners: Use clean cold water
Please note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently. Sample pots are available to order upon request. Always carry out a test patch (approximately 100x100mm) before full application to ensure compatibility with previous coatings and the substrate, and to ensure the colour achieved meets your requirements. Failure to do so will result in a product refund claim not being accepted.