Polyurethane floor varnish gives high protection and a gloss finish to your hardwood floor. Protects bare wood and previously painted, stained and varnished floors. Applied to floor boards and hardwood floors for a natural appearance whilst protecting the surface.
Provides a tough, durable finish, so tough we supply roller rinks with our varnish. Formulated to withstand knocks, scuffs and spills, it is suitable for all interior wood floors. Use to achieve an attractive, high gloss, durable finish.
Apply with brush, roller, conventional or airless spray
Surface dry in 3 hours. Hard dry in 8 hours
Overcoat after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
You might also want to look at our Yacht varnish and our Polyurethane Varnish. Palatine Paints Polyurethane Floor Varnish is available as a high gloss finish. If you’re looking for a more contemporary matt/satin finish to your wood floor, ask about our eggshell version. We also have a coloured gloss floor varnish available.
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease etc.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces.
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
A minimum of two coats is recommended on bare wood to optimize the coatings performance.
Colours Available: Clear.
Pack Sizes: 1 Litre, 2.5 Litre, 5 Litre.
Coverage / Drying Times
(Based on standard conditions of 20°C)
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours. Keep coated areas dry for a minimum of 24 hours following application. Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Q: What is Polyurethane Floor Varnish Clear?
A: A hard-wearing, solvent-based varnish designed to give high protection and a gloss finish on interior hardwood floors. It’s suitable for bare wood and for floors that are previously painted, stained, or varnished.
Q: Is it durable enough for busy areas?
A: Yes. It’s formulated to handle knocks, scuffs and spills and is described as so tough it’s even supplied for roller rinks.
Q: Where can it be used?
A: While primarily for interior wood floors (hardwood, floorboards, etc.), it is also suitable for use on stone, slate, and concrete. It can be applied to bare wood or previously painted, stained, and varnished surfaces.
Q: What should I use for thinning and cleaning?
A: Use Palatine White Spirit for both thinning and cleaning your tools.
Reviews
There are no reviews yet.
Be the first to review “Polyurethane Floor Varnish Clear” Cancel reply
To provide the best experiences, we and our partners use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us and our partners to process personal data such as browsing behavior or unique IDs on this site and show (non-) personalized ads. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Click below to consent to the above or make granular choices. Your choices will be applied to this site only. You can change your settings at any time, including withdrawing your consent, by using the toggles on the Cookie Policy, or by clicking on the manage consent button at the bottom of the screen.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Reviews
There are no reviews yet.