Substrate
Painting Equipment
Clearance
Profinish Satin paint, quick drying, protective finish paint for wood or metal. Formulated as a decorative top coat for interior and exterior use.
Price range: £11.55 through £162.66
Stay Social. Connect with us.
Profinish Satin paint is a decorative and protective top coat for interior and exterior use on wood or metal. If you’re looking for a contemporary alternative to a high gloss finish, then satin is a good choice. A satin finish means your surface will reflect some light, but won’t have the high ‘mirror’ finish of gloss. Professional satin finish paint is available in many colours, including black, white, and anthracite grey.
With its high opacity, Profinish Satin paint provides great looking surface which is touch dry in 3 hours. Because you can use it on both woodwork and metal, it’s great for coordinating different surfaces giving quick drying satin finish paint to skirting boards, architraves, doors, window frames, radiators and more.
Ideal for use as exterior wood paint or metal paint and is highly popular for garage doors and front doors (check out the reviews below). If you are unsure about the differences between various paint finishes? The British Coatings Federation has a good overview here.
If a matt finish is what you’re after, then Palatine Professional Flat Oil Enamel is a great choice. For a high gloss finish try Truglos Professional Gloss.
Do I need a primer? We usually recommend a primer unless you’re painting over a previously painted surface; in which case, lightly sand before painting.
Please note: The colours shown here are only a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Please note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently. Sample pots are available to order upon request. Always carry out a test patch (approximately 100x100mm) before full application to ensure compatibility with previous coatings and the substrate, and to ensure the colour achieved meets your requirements. Failure to do so will result in a product refund claim not being accepted.
Colours Available: BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 500 ml, 1 Litre, 2.5 Litre, 5 Litre.
Coverage / Drying Times:
Surface Dry: 3 hours
Hard Dry: 8 hours
Overcoat: after 24 hours
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Door Paint
Door Paint
Andrew Traynor (verified owner) –
First time i have used this paint, and have to say it has to be one of the best paints i have ever used.. Great coverage, and dries to a beautiful finish.. exactly what i have been looking for..
Bought 2.5 litres to do the eves of my house, but so happy with the result, i am now going to order another 7.5 litres, to do my dormer, and down pipes.. if your looking for a quality paint at a fantastic price, look no further than Palatine Paints…
David Hodges (verified owner) –
First time I have used this product and so far I am very pleased with it.Bought a litre tin to paint garage door and it looks great.Gave the door two coats so hopefully it will last for a while before it needs repainting.
Carol Ballard –
Excellent order to delivery, the paint is exactly what I ordered and matched my garage doors. Very pleased with my order thank you very much.
Mr D Collins –
Super fast delivery and great paint many thanks (Anthracite Grey, 1 Litre)
Gavin Tester –
Great product (Anthracite Grey, 5 Litre)