Coo-Var Water Based Brick & Tile Paint

Surface Preparation

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7 °C during the painting and drying process.

Preceding Coat

Apply Direct to stable surfaces (see Surface Prep section)

Subsequent Coat

Coo-Var Brick and Tile Paint Matt Red

Remarks

Do not paint when temperature will be at or below 7 deg C during the painting and drying process.

Estimated Coverage

13sqm per litre