Buy Coo-Var Pro-Netic Magnetic Chalkboard Paint is a water based coating that creates a magnetic surface that can also function as a chalkboard. For use on materials other than wood, MDF or plasterboard, carry out a test before full application. For use to make a magnet chalkboard, the surface will need to be primed once painted. Details of this process are located in the ‘REMARKS’ section of the TDS.
Touch dry in 30 minutes and hard dry in 2 hours. Leave 6 hours before overcoating.
Buy the best Magnetic Chalkboard Paint on the market.
For full details, please see the datasheets or contact us via the online chat, phone or email for any questions about this item or to check stock.
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Mix well before use.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7 °C during the painting and drying process.
Apply direct on to walls and wood. On nonferrous metal use Coo-Var All Metals Primer.
Coo-Var Pro-Netic Magnetic Chalk Board Paint
Apply a minimum of 3 coats by brush. Do not paint when temperature will be at or below 7 deg C during the painting and drying process. For use as a chalkboard: To prime your chalkboard, lay a piece of chalk on its side and cover the entire board liberally with chalk. Rub it in with a dry rag and then erase. Chalkboards are porous, so if you do not prime there is a risk the first markings will be there permanently. For more information contact Technical Services on 01942 884122.