MarineMaster Boat & Barge Gloss is a high gloss solvent-borne protective finish formulated as a decorative, protective top coat. It is an ideal paint for use on narrow boats, canal boats and other vessels. We have a wide range of colours available, with colour matching to the RAL Classic or BS 381c/4800 colour charts also available.
Provides durable, long term protection
Suitable for wood, metal and other surfaces. Ideal for decoration of narrow boats and barges
Touch dry in 2 hours, providing excellent wet edge and flow out
Best applied by brush or roller but can also be sprayed
MarineMaster Boat & Barge Gloss can be used as a final coat over selected primers and undercoats from Palatine’s wide range or on previously painted surfaces.
⚠️Important Notice: Tinted and customised paints and coatings cannot be returned. Please note that many paint items are custom, bespoke, tinted (not ready-made colours), and are therefore non-returnable or cannot be cancelled once tinted. Ready-made colours include black and white.
Loading colour options...
Available for in-store pick upi
Select in-store pickup option at checkout.
Available at Our Store, 55 Smallbrook Lane, Leigh, WN7 5PZ
Find Us
Out of stock, but can be backorderedi
This item is currently out of stock.
Order now and we will dispatch as soon as stock arrives.
MarineMaster Boat & Barge Gloss is a protective, decorative paint designed to give long term, durable protection to your marine surfaces, including narrow boats, canal boats and barges. A versatile, water resistant, solvent borne paint that is suitable for both wood and metal. This makes it an excellent coating for narrow boats and canal barges, as well as other boats or cruisers.
With superb wet edge and flow out, this paint is ideal both for larger surface areas and also for the fine lines and artwork involved in boat detailing and narrow boat painting.
MarineMaster Boat & Barge Gloss is a high gloss marine enamel paint, based on vinyl toluene modified alkyd resin. It dries to a hard finish and is touch dry in 2 hours. Use Boat & Barge Professional Gloss over selected primers from Palatine’s range including red oxide primer and anti-corrosive metal primer or over previously painted surfaces.
Boat & Barge paint is best applied by brush or roller. However, it can also be sprayed. If spraying, dilute with no more than 10% of white spirit). Boat and barge gloss has been used for many narrowboat restorations, which can be seen on waterways around the UK.
Highlights:
For interior and exterior use
Marine top coat paint for use on wood, metal and many other surfaces
Durable, high gloss protection for boats, canal barges, narrow boats and more
Based on vinyl toluene modified alkyd resin, (lead free) containing organic and inorganic pigments
Surface Condition: Ensure all surfaces are clean, dry, and free from any dust, oil, grease, and salt contamination.
Bare Steel: Metal must be free from rust and scale. Prime with a high-quality anti-corrosive primer, such as Palatine Marine Anti-Corrosive Metal Primer, before applying the gloss.
Bare Wood: Ensure the wood is dry and clean. Apply a suitable wood primer/sealer followed by Palatine High Build Marine Undercoat to provide a smooth base.
Previously Painted Surfaces: Existing coatings must be sound and well-adhered. Lightly abrade (sand) the surface with fine abrasive paper to create a “key” for the new paint. Rinse thoroughly with fresh water and allow to dry completely.
Undercoating: For the best depth of colour and a high-mirror finish, it is highly recommended to apply Palatine High Build Marine Undercoat in a coordinating shade before the final gloss coats.
Testing: Always carry out a test patch (approx. 100mm x 100mm) to check for compatibility with the substrate or previous coatings and to confirm the colour.
Application
Mixing: Stir the paint thoroughly for approximately 2 minutes before use. A drill stirrer or a wooden batten at least 25mm wide is recommended to ensure pigments are fully dispersed.
Methods: Apply using a high-quality natural bristle brush or a short-pile solvent-resistant roller.
Thinning:
* Brush/Roller: Usually applied at full strength. If required in very cold conditions, thin by no more than 5% with Palatine White Spirit.
* Spray Application: Dilute by approximately 10% by volume with Palatine White Spirit for airless or conventional spray.
Technique: Apply in thin, even coats. To achieve a professional “yacht” finish, “lay off” the paint with a brush immediately after rolling to remove any orange-peel texture or bubbles.
Coating System: Two coats are recommended for maximum durability and gloss retention.
Conditions: For best results, apply in warm (minimum 10°C) and dry conditions. Avoid painting in direct strong sunlight or if the temperature is likely to drop below 10°C (or if the dew point is reached) during application and drying.
Please note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently. Sample pots are available to order upon request. Always carry out a test patch (approximately 100x100mm) before full application to ensure compatibility with previous coatings and the substrate, and to ensure the colour achieved meets your requirements. Failure to do so will result in a product refund claim not being accepted.
Colours Available: BS 381C, BS4800 and Ral Classic range.
Pack Sizes: 1 Litre, 2.5 Litre, 5 Litre, 20 Litre
Coverage / Drying Times
Surface Dry: 2 hours
Hard Dry: 8 hours
Overcoat: after 24 hours. Keep coated areas dry for a minimum of 24 hours following application. Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 12 – 14m² per litre.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Thinning and Cleaning
Thinning: Use Palatine White Spirit. For spray application, a dilution ratio of no more than 10% by volume is recommended.
Q: What is the main purpose of MarineMaster Boat & Barge Gloss?
A: This is a high-gloss, solvent-borne protective finish designed as a decorative top coat for narrowboats, canal barges, and other marine vessels.
Q: On which materials can this paint be used?
A: It is a versatile paint suitable for both wood and metal surfaces, making it ideal for the various structures and detailing found on boats.
Q: Does it have a good finish for detailed work?
A: Yes, the paint features excellent “wet edge” and “flow out” properties, which makes it perfect for large surface areas as well as fine detailing and artwork.
Q: Can I thin the paint for spray application?
A: Yes, for spraying, you can dilute the paint by no more than 10% by volume using Palatine White Spirit.
Q: How long should the paint be protected from water after application?
A: You must keep the coated areas dry for a minimum of twenty-four hours after application to allow the finish to set properly.
To provide the best experiences, we and our partners use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us and our partners to process personal data such as browsing behavior or unique IDs on this site and show (non-) personalized ads. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Click below to consent to the above or make granular choices. Your choices will be applied to this site only. You can change your settings at any time, including withdrawing your consent, by using the toggles on the Cookie Policy, or by clicking on the manage consent button at the bottom of the screen.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
phil ackers –
good quality item
Graham Starkey –
good quality
John Wheeler –
Very glossy paint. Gives good coverage
Steven Robinson –
superb quality
Julian Harvey –
excellent quality paint. many thanks : )