FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
UPVC & Plastic Cladding Paint
UPVC & Plastic Cladding Paint is fast drying and has superb adhesion and flexibility on most plastic and UPVC surfaces.
Can be applied to weathered and worn UPVC and cladding to refresh your property. Spruce up your property with Anthracite Grey UPVC cladding.
- UPVC Cladding
- Plastic Downpipes
- Guttering
- UPVC Door paint
- Volume: 4.4L
£75.46 – £78.05
Stay Social. Connect with us.
Product Description
UPVC & Plastic Cladding Paint is ideal for rejuvenating and revamping, old tired looking fascia boards, UPVC window frames and UPVC doors. A 1k Acrylic Plastic Coating formulated for excellent adhesion to most hard and flexible plastic surfaces including UPVC, foamex board and flexible PVC materials.
Plastic Cladding Paint is an economical alternative to replacing old and tired cladding and fascia boards. Can you paint UPVC windows? Plastic Cladding and UPVC Paint is ideal, as well as being fast drying also has excellent adhesion. Making it quick and easy to apply.
We have a wide range of colours to choose from and have the facility to colour match to RAL Classic and British Standard colour codes.
Tired of black plastic guttering? We have a wide choice of grey plastic paint colours. Update your property with Anthracite Grey UPVC cladding.
Suitable for domestic and commercial use. Interior and exterior use
Volume: 4.4L
Please note: The colours on the product listings are only given as a guide. This is due to the fact that every computer monitor has a different capability to display colours. In addition, everyone sees these colours differently.
Preparation:
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, moisture, oil, grease, old coatings and surface contaminants.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Not suitable for PE or untreated Foamex.
Application:
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray.
2-3 coats are recommended to reach desired film thickness. This will prolong the life and performance of the coating.
If using more than one batch of the same colour, intermix before use
DRYING TIMES AND COVERAGE
Drying Times@20°C:
Flash off: 2mins
Dust free: 5-10mins
Through dry: 24 hrs
Full cure: 4 days
Typical Dry Film Thickness: 30 microns
Covering Capacity: 10m2 per litre @ 30um DFT
Reviews
There are no reviews yet.