Stay Social. Connect with us. 

We accept most major credit/debit cards and e-wallets

Thermoguard Thermoproof Exterior 5lt

Thermoguard Thermoproof Exterior Fluid is a fire proof fluid for bare timbers such as sleepers, fencing, cladding and decking.

  • Weather resistant
  • Water-based
  • Non flammable formula
  • Durable
  • Allows wood to weather naturally

 

£120.72 exc VAT | £144.86 inc VAT

10 in stock

Product Description

Thermoguard Thermoproof Exterior Fluid is a fire proof fluid for bare timbers such as sleepers, fencing, cladding and decking. The fluid penetrates deep into porous wood and when exposed to fire creates an inert layer to help insulate the wood.

The weather resistant, water-based, non flammable formula enables safe application by untrained and inexperienced users. Durable clear fire and flame resistant fluid for exterior wood which allows the wood to weather naturally.

Thermoguard Thermoproof Exterior Fluid must be able to penetrate the wood in order to be effective. Any water resistant coatings, sealer coats, waxes, paints or waterproofing treatments must removed before application of the fluid. Try Thermoguard Thermostrip 

Thermoguard Thermoproof Application:

Apply to bare wood in dry conditions above 5ºC and allow to completely dry out before applying paint or waterproofing. Thermoproof exterior fluid is water based and environmentally friendly.

Apply at 3.5m² per litre. Normally applied in 3 coats at 10.5m² per litre but can be applied in 2 coats at 7m² per litre on very porous, rough sawn wood. Ensure each application has fully soaked in before applying the next. Allow a minimum of 2 hours between applications.

Fire certificates are available free of charge, please contact us with your requirements before ordering.

Please Note: If certification is required, an intumescent enquiry form must be completed prior to purchase of the product, as this will ensure the correct quantity is applied to achieve the fire rating. The enquiry form is available to download from the ‘Data Sheets’ tab.

 

Application Conditions
Apply to dry wood (below 18% moisture) above 5°C in dry conditions prior to painting or
waterproofing. Where possible wait until the wood has thoroughly dried out before fixing.
Allow adequate time for the wood to dry out after treatment before applying any coating.

Preparation
For treatment with Thermoguard Thermoproof Exterior Fluid to be effective it needs to be able to
penetrate the wood.
Remove any water resistant coating, sealer coat, waxy feel, glossy sheen, or waterproofing effect
created by a previous treatment or preparation before application.

Application
Apply by Brush, Roller or Spray.
Apply at 3.5m2 per litre. Normally applied in 3 coats @ 10.5m2 per litre but can be applied in 2 coats at 7m2 per litre on very porous rough sawn wood.
Ensure each application has fully soaked in before applying the next. Allow a minimum of 2 hours between applications.
Apply to small test patch prior to main application.

Cleaning
Return as much unused material to its original container as possible. Wash brushes
rollers and guns with clean waters immediately following use.

Coverage
19sqm per 5L

Reviews

There are no reviews yet.

Be the first to review “Thermoguard Thermoproof Exterior 5lt”

Thermoguard Thermoproof Exterior 5L
Thermoguard Thermoproof Exterior 5lt

10 in stock

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.