Barrettine Teak oil is used to treat and enhance untreated wood including hardwood. A natural blend of clear oils, Teak Oil penetrates unsealed wood leaving a natural, water resistant finish ideal for outdoor garden furniture and traditional matt finish indoor furniture, also available in a spray form.
For irregular shapes or difficult to reach surfaces, use the 500ml teak oil spray. Regular use will nourish, revive and feed wood, as well as reduce the weathered appearance of the wood, giving a satin finish (not suitable for Oak, furniture or flooring). Nourish, protect and reduce damage to your wood.
Read our blog for more details Wood Oil: Why Use It and Which One to Choose.
- A natural oil for the treatment and nourishment of unfinished exotic woods
- Ideal for garden furniture or traditional matt finish indoor furniture
- Preserves the natural beauty of the wood
- Quick and easy to apply
- Dries to a satin to matt finish
- Very High VOC
- Also available in a teak oil spray
Apply by brush or lint free cloth. After 10-15 minutes remove excess oil with a lint free cloth. Drying time 48 hours. Teak oil can be used as an alternative to Barrettine Garden Furniture Oil
Preparation and method of application are essential for great results:
Shake oil well before use. Keep container upright at all times
Ensure wood to be treated is dry, free from dirt and repellant coatings such as wax, paint and varnish (remove and sand down as required).
Wipe oily woods with White Spirit before application
Apply by brush or lint free cloth – after 10-15 minutes, remove excess oil with a lint free cloth
Clean equipment with Barrettine White Spirit
Precaution: cloths used for oiling may spontaneously combust. Immediately after use, soak them in soapy water then lay them flat outside on a non-combustible surface to dry
Available as an RTU spray or liquid for brush/lint free cloth application.
Use Barrettine Garden Furniture Cleaner first to remove lichen, algae, moss and similar detritus for best results where necessary
Apply 2- 3 thin coats of Teak Oil leaving 12-24 hours between each coat and a minimum of 1 day after the final coat before using treated item
Can be used inside and outside. For outside use, we recommend a prior application of wood preservative treatment that must be allowed to dry before applying Teak Oil. Very regular retreatment will be required if used outside
Drying Time: 24 – 48 Hours
Coverage: 1 litre to 8-10 sq metres
Application: Brush/lint free cloth
6 x 250 ml, 12 x 500 ml, 6 x 1 Litre, 6 x 2 Litres (Trade), 4 x 5 Litres, 1 x 25 Litres