FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
PROXL Generation20 Water Based Degreaser – 5 Litre
A water based degreaser that removes a wide range of contaminants as well as surface static.
- Suitable for old paintwork, bare metal and plastic surfaces
- Effectively removes grease, silicone, waxes and dirt, including tree resin and other contaminants
- Reduces the organic solvent impact on the environment
£29.68 exc VAT | £35.62 inc VAT
4 in stock
Stay Social. Connect with us.
- Description
- Technical Information
- Directions for Use
- Data Sheets
- Directions For Use
- Reviews (0)
- Trustpilot Reviews
Product Description
PROXL Generation20 Water Based Degreaser is an anti-silicone and anti-static panel degreaser. It removes a range of contaminants, including grease, silicone, wax, dirt and tree resin. The degreaser prepares old paintwork, bare metal and plastic surfaces for painting by removing particles and residues that could interfere with the paint.
Generation20 Water Based Degreaser also removes surface static, which can accumulate during the preparation of surfaces for painting.
The water based nature of this degreaser makes it more environmentally friendly than solvent based alternatives. It reduces the level of harmful organic solvent emissions released into the atmosphere.
Once the degreaser is applied, we have a range of suitable topcoats available, including our chassis paint and coach enamel. Both are available in a wide range of colours as standard, with further colours available on request. Our chassis paint is also available in gloss, satin and matt finishes to match your vehicle or preference.
For an alternative degreaser, see PROXL Generation20 Panelwipe degreaser.
Size: 5 Litre
Colour: Clear
Specific Gravity: 0.882
VOC Directive: Not applicable
VOC Content: Not applicable
Shelf Life: 5 years when stored in the above conditions
Storage
Store in a cool dry place in original container between +10°C & +30°C
Surface Preparation
Designed for use over most automotive substrates and existing paint surfaces including old paintwork, bare metal and plastics
The product will efficiently remove greases, silicones, waxes and dirt including tree resin
Application Guide
1. Apply to the surface with a pump sprayer or clean cloth soaked with Degreaser
2. While the surface is still wet, fully dry the surface with a second clean dry cloth.
Disposal
Completely emptied cans should be put in recycling skips or appropriate container. Cans which are not empty should be disposed off as special refuse.
Product Documents
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “PROXL Generation20 Water Based Degreaser – 5 Litre”
You may also like…
Panel Wipe
£25.05 – £25.39
Reviews
There are no reviews yet.