FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
PROXL 2K Clear Lacquer Spray
A 2K clear lacquer that provides a crystal clear spray finish to car surfaces.
- Genuine 2K isocyanate lacquer
- UV and petrol resistant
- Brilliant gloss retention
- Very scratch resistant
- Gives a spray gun finish every time
£17.34 – £24.80
Stay Social. Connect with us.
- Description
- Technical Information
- How To Apply
- Data Sheets
- Directions For Use
- Reviews (0)
- Trustpilot Reviews
Product Description
PROXL 2K Clear Lacquer Spray provides a high gloss crystal clear finish on painted car surfaces. It has excellent gloss retention and scratch resistance, and is UV and petrol resistant.
The aerosol is easy to activate and use, with mechanical polishing possible after 24 hours. The lacquer is available in 200ml and 500ml sizes, with a unique Vari-nozzle, which allows the spray pattern to be adjusted to adapt to the surface or project.
This aerosol allows for a professional lacquer finish without the use of a full spray gun set up.
We also have single pack lacquers available, such as Promatic Clear Lacquer and Prosolve Clear Lacquer.
Colour: Grey
Coverage: 0.3 – 0.4m²
Colour: Grey
Coverage: 0.3 – 0.4m²
Temperature Resistance: to 90°C
Touch Dry: 5 hours
Suitable Substrates (cleaned & abraded): Solvent or water based basecoat paint
Application Guide:
- Carry out test spray
- Areas to be sprayed must be free of grease, dust and dry
- For professional use only
- Wear an appropriate respirator
Application Process:
- Remove cap and insert metal ring provided
- Pull fully out and twist 360° to release activator
- Shake the aerosol for at least 2 minutes, after agitator ball is free
- Apply in cross coats from distance of 250mm from object
- Allow 10mins for flash off between coats
- Apply 2-3 coats
- IR 15-20 minutes
- Dust dry 5 minutes at 20°C, Touch dry 5 hours, Overcoatable 2 minutes at 20°C
- UV 15-20 minutes, 20°C 24 hours, 40°C 40 minutes
- After use, turn aerosol upside down and empty valve.
- Once activated, use within 24 hours
Product Documents
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “PROXL 2K Clear Lacquer Spray”
You may also like…
Multi Surface Spray
£6.20 exc VAT | £7.44 inc VAT
High Solids Lacquer
£6.09 exc VAT | £7.31 inc VAT
Reviews
There are no reviews yet.