FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Disposable Latex Gloves (100 Pack)
- High-quality manufacturing using natural rubber for a better fit and improved performance
- Natural latex for great flexibility and comfort as well as a 5-year shelf life
- Beaded cuff for a stronger glove that’s easier to put on and remove
- Medical grade 5.0g
- AQL – 1.5
£9.00
Stay Social. Connect with us.
Product Description
There’s more to gloves than meets the eye, and our Natural SafeTouch Latex Powder-free gloves have several features that make them a great all-rounder for a wide range of applications, from medical to motor factors.
Perfect for tasks where sterile gloves aren’t needed, their natural latex gives a ‘second skin’ fit and feel more comfortable than synthetic nitrile gloves, but still offering superb barrier protection.
- Low protein levels and minimal residual chemicals give a smoother finish and lasting protection.
- There’s a beaded cuff to make them easier to put on and take off, and the textured fingertips give added peace of mind when it comes to precision and grip.
- These gloves are for single use only and come in boxes of 100
- With a shelf life of 5 years they outlast many comparable gloves in the market.
If you suffer from skin allergies, you should be aware that the natural latex used in these gloves could cause some irritation. Don’t worry though: we offer a wide range of synthetic non-allergenic alternatives.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Disposable Latex Gloves (100 Pack)”
Reviews
There are no reviews yet.