Coo-Var Water Based Oil Remover

Surface Preparation

Sweep floor to remove debris

Mixing Instructions

Supplied ready for use

Application Conditions

Apply liberally to the area to be cleaned. Work well into the surface with a stiff brush and leave for 20 to 60 minutes. Rinse the area well with a pressure washer or hose, collect the rinse water with a wet vac machine. Once the surface oil contamination has been removed, continue with any surface preparation as necessary i.e. mechanical abrasion or chemical etching as required to provide a key for a subsequent coating.

Preceding Coat

N/a

Subsequent Coat

Allow the surface to dry thoroughly. This can take up to several days. Apply a suitable primer for the surface if overcoating.

Remarks

Oil remover contains no dangerous caustic chemicals, harmful solvents, phosphates or aggressive biocides. It is safer for the user and the environment.
Shelf Life: 12 Months in original container