Coo-Var Oil Tolerant Primer

Surface Preparation

Concrete surfaces must be prepared by scarifying, vacuum shot-blasting, planning or other suitable method. All traces of concrete hardeners or other contaminants must be removed. The surface must be thoroughly vacuumed to remove concrete dust and then protect against further contamination by suitable means. Surfaces must be free from liquid, water, and the atmosphere must not be condensing. Important: Coo-Var Oil Tolerant Primer will not bond to grossly contaminated surfaces and surface cleaning and preparation is an essential part of this process.

Mixing Instructions

Mix the contents of the hardener component with the base thoroughly using a slow speed power stirrer.

Application Conditions

As dictated by normal good painting practice. Do not apply if the temperature is likely to drop below 10 °C during application or during the drying process. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

N/a

Subsequent Coat

Coo-Var Profloor Plus

Remarks

Please use this technical data sheet in conjunction with the Oil Tolerant Primer guidance notes.

Estimated Coverage

16sqm per 4kg pack