Floor Preparation
Workwear & PPE
Rust Treatment
Workwear & PPE
Rust Treatment
Coo-Var Graffiti Protection System
FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Coo-Var Graffiti Protection System is a clear surface coating that offers protection against graffiti and poster vandalism.
Health and Safety: Contains: OXIMINO-SILANE
From £134.35 Excl. VAT
Stay Social. Connect with us.
Coo-Var Graffiti Protection System is a clear surface coating designed to offer excellent protection and graffiti and poster vandalism. Graffiti can be easily cleaned from the coating using water or a mild cleansing agent and posters easily peel off as glue and tape does not stick to the coating. The system is suitable for a wide range of prepared rough and smooth surfaces and retains the appearance and aesthetics of the original surface. Test with a small area before full use if applying to paint, metal or plastic.
Touch dry in 1 to 2 hours and hard dry in 2.5 hours. Leave 4 to 6 hours before overcoating.
For full details, please see the datasheets or contact us via the online chat, phone or email for any questions about this item or to check stock.
Surface Preparation
Remove existing graffiti with dedicated graffiti removal agents where required. Ensure that the substrate is free of any residue from graffiti removal agents. The surface must be clean, sound and free of any dust, dirt, oil and grease. If necessary wash substrate with high pressure water and allow to dry. Adhesion should be checked over all surfaces as follows to ensure suitability of GP101: – Dab GP101 with a small rag onto a small area of substrate (5-10cm² is sufficient) and allow to dry overnight. For signage and murals, after sufficient dry time has elapsed, rub firmly across the test area with finger for loss of adhesion. For other painted surfaces, rub firmly with a rag soaked with White Spirit, then rub the surface by hand. If there is no evidence of GP101 peeling off the surface is compatible.
Mixing Instructions
Stir well before use and use manageable quantities; Pour a small quantity into roller tray or spray unit as required. Then reseal container immediately. GP101 has a pot life of approximately two hours when exposed to the elements, can vary depending on the ambient conditions.
Application Conditions
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. For Spray application please see GP101 Guidance Note.
Preceding Coat
Coo-Var Anti-Graffiti Sealer Coat on porous and natural surfaces such as sandstone. Apply direct to non porous brick work and masonry.
Subsequent Coat
GP101 Graffiti & Flyposting Protection System
Remarks
Please refer to GP101 Guidance Note along with this technical data sheet.
GP101 has a pot life of approximately two hours when exposed to the elements, can vary depending on the ambient conditions.
Estimated Coverage
8 to 10sqm per litre
Reviews
There are no reviews yet.