FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
Brush Mate 4+ Paint Brush Storage System
The handy Trade 4+ is ideal for smaller jobs and general DIY use compared with the Brush Mate 20. Holding up to 4 brushes with an impregnated vapour mate pad and no fluid.
- Resilient nylon construction
- Convenient size
- No need to clean brushes between use
- Suitable for brushes used for solvent based paints and varnishes
£19.66 exc VAT | £23.59 inc VAT
7 in stock
Stay Social. Connect with us.
Product Description
Brush Mate 4+ paint brush storage system keeps paint brushes fresh until you need them. No need to clean! After painting cleaning or storing wet brushes can be time consuming and messy. Not only that, if you leave brushes in jars of cleaner, ferrules can rust, bristles bend and the often paint hardens. Or it spills while you’re transporting it. With the Brush Mate 4+ paint brush storage system, just pop your brushes into the container and the unique vapour system will keep them soft and pliable ready for when you next need them.
While the Trade 4+ is ideal for smaller jobs and general DIY use, if you’re a professional, the Brush Mate 20 might be better for you. Holds up to 4 or more brushes. Impregnated Vapour Mate pad – no fluid. Resilient nylon construction. Convenient size. Suitable for storing wet brushes used for gloss and varnish.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “Brush Mate 4+ Paint Brush Storage System”
Reviews
There are no reviews yet.