Substrate
Painting Equipment
Clearance
Industrial Coatings
Line Marking
Body Shop Primer
2K PU Repair
Clearance
Industrial Coatings
Line Marking
Body Shop Primer
2K PU Repair
Clearance
Industrial Coatings
A high quality, deep penetrating, low odour preserver to protect wood against wet rot and wood boring insects. Its semi transparent low sheen finish allows viewing of the natural wood texture. Ideal for use on pressure treated wood, treated timber or untreated wood.
£10.68 – £187.72Price range: £10.68 through £187.72
The colour swatches are an indication only and representative of the product applied to clean new/pale timber and rough sawn pine (2 coats). The final colour finish can vary considerably due to the age, type & condition of the timber being treated and will darken with multiple coats. Viewing colours on multiple digital screens can vary considerably and may not be totally accurate. We always recommend carrying out a small inconspicuous test area first. It is the Customer/end users responsibility to satisfy themselves that the colour finish is correct before full application.
Smooth Pine (2 coats)


Rough Pine (2 coats)


While Barrettine premier wood preserver is available in seven UV fade resistant colours, it can also be overcoated for aesthetic purposes or for added protection, with suitable paints and wood oils.
NOTE: Before overcoating, allow the wood to fully ‘weather’ after applying the preservative. This is especially important for water based paints as the wax contained in the preserver will repel the water and prevent adherence of the paint. The ‘weathering’ process can take several months.
If you are looking to refresh previously treated wood, take a look at Barrettine’s wood protective treatment.
| Wood Preserver | Universal Preserver | Protective Treatment |
| (The Preserver) | (The Primer) | (The Sealer) |
| Complete all in one protection for bare / untreated wood. | Deep penetrating primer for wood that will be over coated. | Nourishing sealer for pre-treated or pressure treated timber. |
Contact us via the online chat, phone or email for any questions about this item or to check stock. For information on caring for exterior wood check out our blogs
Choosing the right treatment: If you plan to apply a topcoat of paint or varnish over your preservative, please use Barrettine Universal Wood Preserver. For refreshing timber that has already been pressure-treated, we recommend Barrettine Wood Protective Treatment.
*Please note: Wood Preserver Black 25L is currently unavailable until mid April **
How to apply
Prep: Ensure the wood is dry and free from dirt and any repellent coatings (e.g., paint/varnish). Remove coatings and sand as required.
Optional pre-clean: Use a biocidal wash (e.g., Barrettine Knockout Mould and Mildew) before treatment.
Application methods: Brush, dip, roller, or airless spray (minimum 1mm flat fan tip nozzle, 9–11 thou tip). Not suitable for a pump-action garden sprayer.
Coats: Best results typically with 2–3 coats.
Overcoating note: If overcoating (especially with water-based paints), allow the wood to fully “weather” after preserving — this can take several months due to wax content repelling water-based coatings.
Drying/recoat: 12 hours under normal conditions (20°C / 65% RH).
Clean equipment with Palatine White Spirit.
Always read the label. Use biocides safely.
Contains Permethrin, Tebuconazole & IPBC.
Protects uncontaminated timber against wet rot, decay and wood boring insect attack.
Mainly for external applications but some Internal. (refer to internal and external information on the back of the tin/container).
Approved under COPR/BPR
Harmless to plants and pets when dry.
| Brand | Barrettine |
| Available Sizes | 1L, 5L, 25L |
| Available Colours | Clear, Light Brown, Golden Brown, Dark Brown, Black, Red Cedar, Summer Tan, Holly Green |
| Formulation | Oil-based / Solvent-based |
| Durability | Outdoor durability and weather resistance |
| Suitable For | Softwood and Hardwood |
| Safety Data | Download SDS (Safety Data Sheet) |
Q: What is the difference between Barrettine Wood Preserver and Barrettine Wood Protective Treatment?
| Feature | Barrettine Wood Preserver | Universal Preserver | Protective Treatment |
|---|---|---|---|
| Primary Purpose | Complete all-in-one protection for bare/untreated wood. | Primer for wood that will be over-coated (paint/stain). | Nourishing sealer for pre-treated/tanalised timber. |
| Topcoat Required? | No – Standalone decorative finish. | Yes – If exposed to weather elements. | No – Designed to refresh existing surfaces. |
| Rot & Insect Protection | High – Contains active biocides. | High – Contains active biocides. | Low – Non-biocidal (mould inhibitor only). |
| Water Repellency | High – Wax and resin based. | Low – Resins are designed to hold biocides. | High – Resins prevent water ingress. |
| Compatibility | Not suitable for over-painting (high wax). | Compatible with water and solvent-based paints. | Best for refreshing pressure-treated wood. |
| Available Colours | Clear and wide range of wood colours. | Clear Only. | Clear and wide range of wood colours. |
Q: What is wood preserver used for?
A: It is a trusted, long-established wood preservative used to protect outdoor sheds, fences, garden furniture, and general exterior woodwork against wet rot, wood-discolouring fungi, and wood-boring insects
Q: Is it suitable for exterior timber?
A: Yes, this formula is specifically engineered for exterior use. It contains high quality waxes and resins that provide excellent water repellency for garden sheds, fences, and other outdoor structures.
Q: How many coats do I need?
A: For maximum protection and the best finish, you should apply 2–3 thin coats. Always follow the direction of the grain for even penetration
Q: How long does it take to dry?
A: The product is typically touch-dry in 6–12 hours. We recommend allowing a full 24 hours between coats and before applying any decorative topcoats (where applicable) to ensure it has fully settled
Q: Can I paint over it?
A: Generally, no. Because this specific product contains high levels of wax for water repellency, most paints and stains will not adhere to it. If you plan to paint or varnish over the treatment, use Barrettine Universal Wood Preserver instead.
Q: Is it safe for treated timber?
A: Yes, it is perfectly safe to use on previously pressure-treated (tanalised) timber. It helps refresh the colour and adds a vital extra layer of moisture protection.
Q: Do you deliver quickly?
A: At Palatine Paints, we prioritize rapid dispatch for all Barrettine products to ensure your timber protection project can start without delay.
Q: How long does Barrettine Wood Preserver last?
A: You can expect the protection to last between 2–5 years depending on the level of weather exposure and the condition of the timber
Q: What’s the difference between preserver and protector treatment?
A: The main difference is the active ingredients: the Wood Preserver is a biocidal product that kills and prevents rot and insects. The Wood Protective Treatment is a non-biocidal sealer designed for water repellency on timber that is already pressure-treated
Q: Is it a creosote alternative?
A: It is a separate, modern wood preservative product and should not be considered a direct replacement for traditional creosote.
Q: What size should I buy?
A: We offer 1L for small projects, 5L for typical garden sheds or fences, and 25L for trade, contractors, or bulk requirements
Barrettine
Barrettine
Barrettine
Garden Furniture Paint
To provide the best experiences, we and our partners use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us and our partners to process personal data such as browsing behavior or unique IDs on this site and show (non-) personalized ads. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Click below to consent to the above or make granular choices. Your choices will be applied to this site only. You can change your settings at any time, including withdrawing your consent, by using the toggles on the Cookie Policy, or by clicking on the manage consent button at the bottom of the screen.
Donald Buchanan (verified owner) –
Excellent product easy to apply l have used several product from palatinepaints and I haven’t been disappointed with any of them.
Wyn Britten-Jones (verified owner) –
After quite a bit of research I decided on Barrentine wood preserver and wasn’t disappointed, one large tin was just enough to do the inside of a new 8×9 pent shed.
mark.d.clark (verified owner) –
Excellent product, easy to apply and provided a good coverage. I used the clear on a log cabin and I am very happy to recommend this wood preserver. I also contacted Palatine Paints for advice and found then very friendly and helpful.
James Green (verified owner) –
Great product, used before and goes on well and protects the wood as indicated.
Also great service and got the product within few days.
Excellent all round. Thanks!
John Nichols –
I ordered Barrettine wood protective treatment as needed to finish my large shed.
I had already done porch, summerhouse and small shed.
I was told it may be a long wait but this I was prepared to do. I was surprised to receive it after a few days.
It went on very well, nice to use and very pleased with the colour red cedar.
jason (verified owner) –
Thanks John. We are doing our best in unusual circumstances!