Product Description
Our fast-drying Acrylic Line Marker Spray is a professional-grade marking spray paint designed for clear, durable site lines. It is the ideal choice for contractors and utilities requiring high-visibility line marking spray paint and spray paint for line marking on concrete, tarmac, and other hard surfaces.
What is an acrylic line marker spray?
Our acrylic line marker spray is a high-performance, semi-permanent aerosol designed for durability and visibility. As a result, unlike temporary marking aerosols, this paint lays down a durable coating built to withstand vehicle traffic and harsh weather..
Typical Applications
- Temporary line marking on high-traffic concrete and tarmac surfaces.
- Ground marking for utilities, surveyors, and civil engineering contractors.
- Site layout marking to clearly designate work zones, parking bays, and hazards.
- Outdoor marking where fast-drying properties are essential for immediate site use.
Compatible with Your Line Marking Sprayer
Whether you are marking freehand or using professional equipment, this can is designed for versatility. It fits standard handheld applicators and 2-wheel or 4-wheel line marking sprayer trolleys, allowing you to achieve perfectly straight lines or complex stencilled symbols with ease.
Surface suitability
As a professional-grade solution, this floor marking paint spray is formulated for excellent adhesion on almost any substrate, including concrete, tarmac, and grass
- Grass, soil, sand and gravel
- Concrete and brick
- Tarmac/asphalt
- Wood and composites
- Metal, stone
Typical Uses & Common Applications:
- Car Parks & Parking Lots – Create clear parking spaces and directional markings.
- Sports & Recreation – Line tennis courts, football pitches, and golf courses.
- Warehousing & Logistics – Mark aisles, storage zones, and safety areas.
- Grass & Soil – Ideal for landscaping, utility marking, and land surveys.
Specifically designed as a professional-grade line marking spray paint, this semi-permanent marker produces durable marks on a wide range of surfaces, such as concrete, wood, and asphalt, without the need for frequent remarking
Preparation
For best adhesion and visibility, the surface must be properly prepared before spraying.
Surface Cleanliness: Ensure the area is free from dust, dirt, grease, and loose debris. While this paint has excellent adhesion, it will not bond effectively to loose gravel or oily patches.
Dryness: Surfaces should be as dry as possible. Applying to wet grass or damp concrete can cause the paint to spread or take significantly longer to dry.
Initial Agitation: Shake the can vigorously before use to ensure the high-pigment acrylic formula and binder are fully mixed. If the can has been in storage for a while, shake for an extra 30 seconds to re-incorporate settled pigments.
No Primer Required: This is a direct-to-surface aerosol; no separate primer is needed for standard demarcation tasks.
Application
This aerosol is designed for freehand marking, stencilling, or use with mechanical applicators.
Optimal Distance: Maintain a distance of 15–20cm from the surface for the most consistent line width and even coverage.
Spray Motion:
* Apply with a steady, smooth motion, moving at a consistent speed.
* Use light, even pressure on the nozzle; holding it down too long in one spot will cause runs, drips, or “puddling.”
* Work in one direction to ensure straight, professional lines.
Technique for Specific Tasks:
* Stencilling: Hold the stencil firmly against the surface and use short, controlled bursts of spray to prevent paint from bleeding under the edges.
* Applicator Use: The can is compatible with standard line-marking tools and wheel-applicators.
* Overlap: For wider demarcations, use overlapping passes rather than spraying more heavily in a single pass.
Environmental Considerations: Avoid spraying in direct sunlight for extended periods, as this can cause the paint to dry too quickly before it has properly bonded to the surface.
Post-Application & Maintenance
Clearing the Nozzle: To prevent the nozzle from blocking for future use, turn the can upright (nozzle pointing up) and spray for 3–4 seconds until only clear gas comes out. Wipe any excess paint from the tip with a dry cloth.
Drying Times:
* Touch Dry: ~30 minutes (at 20°C).
* Second Coat: While one coat is usually sufficient, wait 24 hours before applying a second coat for maximum durability and visibility.
Storage: Store the cans upright in a cool, dry place away from direct heat sources.
Tip: For best results on tarmac or asphalt, always perform a small test spray first to check for any bleeding or unexpected absorption.
Q: What is acrylic line marker spray used for?
A: It is used for temporary marking and demarcation on construction sites, roads, and utilities projects where clear, high-visibility lines are required.
Q: What surfaces can I use line marking spray paint on?
A: This aerosol is optimized for hard surfaces including concrete, tarmac, asphalt, stone, and brick.
Q: How long does marking spray paint take to dry?
A: The acrylic formula is engineered to be fast-drying, typically becoming touch-dry within minutes, though environmental conditions may vary results.
Q: How long does line marking spray paint last outdoors?
A: Longevity depends on the level of vehicle/pedestrian traffic and weather exposure, as it is designed for temporary site marking.
Q: Is this suitable for grass marking?
A: While primarily designed for hard surfaces, it can be used on grass for temporary marks; however, results may vary compared to dedicated sports pitch paints.
Q: Do I need a line marking wand or applicator?
A: No, the can can be used by hand, but for long, straight lines or professional demarcation, we recommend using a wheeled applicator or marking wand.
Q: Do I need a primer?
A: No primer is stated/required on the current product guidance. For best adhesion, focus on clean, dry, debris-free surfaces.
Q: How much does one can cover?
A: Approximately 100 linear metres per 750ml can, depending on line width, application speed, and surface porosity.
Q: Can it be used outdoors?
A: Yes — it’s suitable for indoor and outdoor applications. Excellent visibility on a wide range of surfaces.
Q: How many coats should I apply?
A: Apply a light, even coat. If a second coat is needed, apply after 24 hours.
Q: What surfaces can I use it on?
A: Grass, soil, sand, gravel, concrete, tarmac/asphalt, wood, composites, metal, brick, and stone.
Q: How do I stop the nozzle blocking?
A: After use, turn the can upright and spray for 3–4 seconds to clear the nozzle.
Reviews
There are no reviews yet.