FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
5 x 4″ High Density Foam Mini Roller Kit
- Efficient Coverage: Achieve smooth, even paint application in tight spaces with high-density foam rollers.
- Professional Finish: Minimize splashes and ensure a consistent result on trim, corners, and edges.
- Compact Design: Perfect for small projects, the 4″ foam rollers fit comfortably in the hand.
- Versatile Compatibility: Suitable for both gloss and satin paints.
- Less Waste: Specially adapted tray reduces paint wastage during use.
We do have a wide selection of alternatives such as Foam Mini Roller & Frame and Mini Roller Tray
£4.34 exc VAT | £5.21 inc VAT
2 in stock
Stay Social. Connect with us.
Product Description
The Prodec High Density Foam Mini Roller Kit is a versatile solution for painting fiddly areas. It includes a compact 4″ tray, five foam roller refills, and a soft-grip handle 4″ roller frame. The high-density foam sleeves efficiently absorb paint and distribute it evenly, ensuring a consistent finish without splashes. This kit is suitable for both gloss and satin paints. Additionally, the specially adapted tray minimizes wastage, making it ideal for smaller-size rollers.
For those seeking superfine finishes, the Mini Paint Rollers / Refills kit features ten 4″ rollers with unique long filament flock.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
