FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
ProSolve Hand Held Applicator For Line Markers
ProSolve Hand Held Applicator is a straightforward piece of equipment, used for line marking simple lines. Ideal for use with ProSolve Stencils for car parks and warehouses.
£29.40 exc VAT | £35.28 inc VAT
1 in stock
Stay Social. Connect with us.
Product Description
The ProSolve Hand Held Applicator For line marking applicator is a straightforward piece of equipment, used to line mark well-kept grass and any hard surfaces. So whether your marking a grass root football pitch or a tarmacked car park this durable product will allow fast applied accurate lines.
This applicator takes 750ml Aerosols only.
Easy to use, just pop in your acrylic line marker spray and start marking!
- Compatible with Prosolve semi-permanent and Prosolve temporary line-marker.
- Holds 750ml aerosols.
- It will last for years with its solid metal construction.
This specific applicator is the for line marking simple lines. If your looking for an applicator which aids in irregular and curved lines then the deluxe 4 wheeled applicator is the product for you.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “ProSolve Hand Held Applicator For Line Markers”
You may also like…
Line Marking Machine
£80.78 exc VAT | £96.94 inc VAT
Reviews
There are no reviews yet.