Product Description
Pliocem® Clear Concrete Sealer is a Pliolite® based breathable clear sealer, perfect for use on cured and or mature concrete or masonry. Use as a sealer before applying subsequent coatings such as Pliocem Masonry Paint, Trutex Masonry Paint or Carbotread Floor Paint. Use also as a stand alone concrete dust proofer to bind a concrete surface to help reduce dust and flaking material.
- Excellent sealing and adhesion properties, it’s also great for use on new or bare masonry.
- Internal or external use
- Suitable for masonry and concrete
- Can be used as a top coat or finish coat
- Touch dry in 6 hours
- Excellent wet edge and flow out
Provides an attractive decorative appearance to houses, garages, office buildings and architectural structures.
Colour: Clear.
Pack Sizes: 2.5 Litre, 5 Litre, 25 Litre
Surface Dry: 6 hours @15C
Overcoat: after 12-24 hours @15C
Keep coated areas dry for a minimum of 24 hours following application.
Please note, drying times will be extended at low temperatures. Do not apply when ambient temperature falls below 10ºC
Theoretical Coverage: 8m² per litre when applied @ 125uM wft.
(Coverage rate can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.)
Please consult the product Material and Technical Data sheets for further information:
Preparation:
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of foam release agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.
Application:
Work well into the surface. Avoid applying the paint to thickly to avoid delaying drying times. The second and subsequent coats can be applied as soon as the first / preceding coat is dry usually after 12-24 hours, and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid power washing the surface for 7 days. The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
Thinning and Cleaning: Use Palatine White Spirit.
Q: What is Palatine Pliocem® Clear Concrete Sealer?
A: This is a solvent-borne, high-performance sealer based on Pliolite® resin. It is a breathable coating designed to seal cured or mature concrete and masonry. It can be used as a standalone dustproofer or as a primer before applying masonry or floor paints.
Q: Where can this sealer be used?
A: It is suitable for both internal and external use on houses, garages, office buildings, and architectural structures. It is ideal for concrete and masonry surfaces that need binding to prevent dusting and flaking.
Q: Can it be used on block paving or printed concrete?
A: No. This sealer is not suitable for printed concrete or block paving surfaces.
Q: What should I use for thinning and cleaning?
A: Use Palatine White Spirit for both thinning the sealer and cleaning your tools.
Q: Does it have a finish?
A: It is a Clear sealer that provides an attractive decorative appearance while remaining breathable to allow moisture to escape the substrate.
Reviews
There are no reviews yet.