FREE SHIPPING AVAILABLE ON ORDERS OVER £75.00*
FrogTape Gloss & Satin Painting Tape Orange 24mm x 41m
Features/Benefits
- Premium grade painter’s tape for most common paint applications, ideal for use with water based & oil based paints
- Edge-treated with patented PaintBlock® Technology for sharp paint lines
- Recommended for use on cured painted surfaces, glass, carpet and stone
- Removes cleanly from most surfaces for up to 21 days
- Premium adhesion to help eliminate the need for touch-ups
- Tape canister for clean, protected storage
- Interior use
- Medium adhesion
£6.33 exc VAT | £7.60 inc VAT
100 in stock
Stay Social. Connect with us.
Product Description
FrogTape Gloss & Satin Painting Tape Orange. Get crisp, clean lines on your next painting project with FrogTape® for Gloss & Satin Painter’s Tape.
How does it work? It’s made with exclusive PaintBlock® Technology, a super-absorbent polymer that reacts with predominantly water and oil based paints. It instantly gels to form a micro-barrier that seals the edges of the tape to prevent paint bleed. The result is a crisp, professional paint line.
Top Tip: Before you paint, run a damp cloth over your FrogTape® for Gloss & Satin paint to give an additional seal, particularly when using Oil bases glosses.
FrogTape® Gloss & Satin is a premium, medium adhesion painter’s masking tape that helps you achieve crisp, clean paint lines and saves time and money by eliminating the need for touch-ups.
Available in a variety of widths to accommodate any application, FrogTape® is the sharp line solution for basic masking applications or advanced wall designs like stripes or geometric patterns.
Surface Preparation
Proper surface preparation is essential for the success of any protective coating system. Before you begin ensure the area is free from any dust, oil, grease, old coatings and surface contaminants.
The preparation of steelwork prior to painting generally falls into two main areas; that of degreasing and the removal of rust and scale.
All surfaces to be painted should be clean, dry and free from loose and flaking material, dust, grease and millscale, etc.
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Fast Dry etching primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Mixing
Stir the paint with a drill stirrer or wooden baton at least 2” wide. Continue to stir during application.
Application
Best results are obtained in warm (minimum 10°C), dry conditions.
Mix thoroughly for approximately 2 minutes using a drill stirrer. A wooden batten at least 25mm wide is also ideal.
Apply an even coat using a brush, short to medium pile roller on smooth surfaces and a long pile roller on textured surfaces
For spray application by either airless or conventional spray a dilution ration of no more than 10% is recommended with Palatine White Spirit by volume applying thin coats allowing each one to dry before applying subsequent coats.
Once dried, a second coat can be applied at full strength. This will prolong the life and performance of the coating.
Thinning and Cleaning: Use Palatine White Spirit.
If using more than one batch of the same colour, intermix before use
Preceding Coat
Prime bare surfaces with Palatine Anti-Corrosive Metal Primer or Palatine All Purpose Primer / Undercoat in accordance with our recommendations
For non-ferrous metals use Palatine Mordant Solution.
Subsequent Coat
A second coat is recommended for maximum protection.
Be the first to review “FrogTape Gloss & Satin Painting Tape Orange 24mm x 41m”
You may also like…
£1.39 exc VAT | £1.67 inc VAT
£2.76 exc VAT | £3.31 inc VAT
Reviews
There are no reviews yet.